Table of Contents
Advertisement
216_AKB; 3; 90, en-US
d2ureepe,
bolsters. This function improves driving
comfort and pleasure.
X
Select seat (
Y
page 198).
X
Selecting Dynamic Seat: Slide
rotate cVd.
X
Confirming selection: Press W.
A scale appears.
You can choose between:
0: off
R
1: level 1 (Less lateral support and slow
R
air pressure build-up in the air chambers
of the seat backrest side bolsters.)
2: level 2 (Strong lateral support and fast
R
air pressure build-up in the air chambers
of the seat backrest side bolsters.)
X
Slide
or rotate
ZVÆ
setting is reached.
X
Saving setting: Press W.
Massage
X
Select seat (
Y
page 198).
X
Selecting Massage: Slide
cVd.
X
Confirming selection: Press W.
A list appears. You can choose between
different types of massage:
Instrument cluster control system
or
XVY
until desired
cVd
or rotate
XVY
2009-05-15T11:47:50+02:00 - Seite 201
Version: 2.11.8.1
The current setting is indicated by a solid circle.
X
Slide
or rotate
ZVÆ
cVd
setting is reached.
X
Saving setting: Press W.
i
Depending on the setting, the massage
function runs for about 7 to 10 minutes.
Instrument cluster control system
Introduction
The control system is activated as soon as the
starter switch is in position 2.
The control system enables you to call up
information about your vehicle and to change
vehicle settings.
For example, you can use the control system
to find out when your vehicle is next due for
maintenance service, to call up statistical
data on your vehicle, and much more.
G
Warning!
A driver's attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others,
selecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions permit
it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximately
14 m) every second.
201
until desired
Z
Advertisement
Chapters
Table of Contents
