Table of Contents
Advertisement
Note: On your initial activation of the camera, firmware configuration can take up to 1
minute. This is a one time process.
3. Pinch the screen to zoom out or pinch outwards to zoom in. You can magnify the
picture up to x4 (400 percent).
4. If desired, before taking the photo, you can tap on‑screen icons to access various
camera options and settings.
5. You can also tap the screen to move the focus to a desired area of interest.
6. Tap
Camera until the shutter sounds. (The picture is automatically stored
within your designated storage location.
Note: Touch and hold
quality.
138
SM-G386T.indb 138
to take a burst shot. These are saved using a Fine image
6/5/2014 2:51:40 PM
Advertisement
Table of Contents
