Mercedes-Benz 2009 GL320 BlueTEC Operator's Manual page 393

X
Gently press the new bulb into bulb socket
7.
X
Place bulb socket back into the housing
7
and turn it clockwise until it engages.
X
Align housing cover and turn it
2
clockwise until it engages.
Parking and standing lamp bulb,
front turn signal lamp bulb,
side marker lamp bulb
X
Turn respective bulb socket 3,
( Y page 390) with the bulb
counterclockwise and remove it.
X
Pull the bulb out of the bulb socket.
X
Gently press the new bulb into the bulb
socket.
X
Place bulb socket 3, or
4
the housing and turn it clockwise until it
engages.
Front fog lamp bulb
! If not done carefully and properly, damage
to the bumper can result. It is
recommended to have this work carried out
at an authorized Mercedes-Benz Center.
Removing front fog lamp cover
or
4 5
Cover
1
Front fog lamp or corner-illuminating front
2
fog lamp
X
Insert a suitable object (e.g. a screwdriver)
at point indicated by the arrow and pry out
cover 1.
back into
5 Cover is released.
1
X
Swing cover outwards and take it off.
1
Practical hints
Replacing bulbs
Accessing and replacing the front fog
lamp bulb
Front fog lamp
1
Retaining screws
2
X
Remove retaining screws 2.
X
Remove front fog lamp from the
1
bumper.
X
Pull electrical connector off.
Z
391