Display; Automatic Transmission; Messages In The Multifunction - Mercedes-Benz 2009 CLK-Class Operator's Manual

Vehicle
Display messages
P Selector Lever In
Park
P Please Shift To N
or P
Tires
Display messages
Check tires, then restart Run
Flat Indicator.
Run Flat Inoperative
Indicator
Vehicle status messages in the multifunction display
Possible cause/consequence
You have opened the driver's door while
the engine was not running and the
automatic transmission was not in park
position P.
You have attempted to turn off the engine
with the KEYLESS-GO start/stop button
while the automatic transmission was not
in park position P.
You have attempted to start the engine
with the KEYLESS-GO start/stop button
while the automatic transmission was in
reverse gear R or drive position D.
Possible cause/consequence
There has been a warning message about
a loss in the tire inflation pressure and the
Run Flat Indicator was not restarted yet.
The Run Flat Indicator is malfunctioning.
Possible solution
X
Shift the automatic transmission into park
position P.
X
Shift the automatic transmission into park
position P.
X
Shift the automatic transmission into park
position P or neutral position N. Make sure the
brake pedal is depressed.
Possible solution
X
Make sure the correct tire inflation pressure is
set for each tire.
X
Then restart the Run Flat Indicator
( Y page 243).
X
Have the Run Flat Indicator checked at an
authorized Mercedes-Benz Center.
Practical hints
Z
287