Instrument Cluster; Limp-Home Mode - Mercedes-Benz 2009 CLK-Class Operator's Manual

Controls in detail

Instrument cluster

Deactivating manual shift program
X
Press the program mode selector switch
repeatedly until C or S appears in the
multifunction display.
or
X
Restart the engine.
The automatic transmission will go to
automatic program mode (C or S).
Manual program mode M is not stored.
Emergency operation (limp-home
mode)
If vehicle acceleration becomes less
responsive or sluggish or the automatic
transmission no longer shifts, the automatic
transmission is most likely operating in limp-
home (emergency operation) mode. In this
mode only second gear and reverse gear R
can be selected.
X
Stop the vehicle in a safe location.
X
Shift the automatic transmission into park
position P.
X
Turn off the engine.
X
Wait at least 10 seconds before restarting.
X
Restart the engine.
120
X
Shift the automatic transmission into drive
position D (for second gear) or reverse gear
R.
X
Have the automatic transmission checked
at an authorized Mercedes-Benz Center as
soon as possible.
Instrument cluster
Introduction
For a full view illustration of the instrument
cluster, see "Instrument
cluster" ( Y page 32).
G Warning!
No messages will be displayed if either the
instrument cluster or the multifunction
display is inoperative.
As a result, you will not be able to see
information about your driving conditions,
such as speed or outside temperature,
warning/indicator lamps, malfunction/
warning messages or the failure of any
systems. Driving characteristics may be
impaired.
If you must continue to drive, please do so
with added caution. Contact an authorized
Mercedes-Benz Center as soon as possible.