1. Manuals
  2. Brands
  3. Eltek Manuals
  4. Gateway
  5. R3601-W2
  6. User manual

Eltek R3601-W2 User Manual

Sfp gigabit ethernet wlan 11n gateway
Hide thumbs Also See for R3601-W2:
Table of Contents

Advertisement

Quick Links

Eltek R3601-W2
SFP Gigabit Ethernet WLAN 11n Gateway
Eltek R3601-W2
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R3601-W2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Eltek R3601-W2

Summary of Contents for Eltek R3601-W2

  • Page 1 Eltek R3601-W2 SFP Gigabit Ethernet WLAN 11n Gateway Eltek R3601-W2 User Manual...
  • Page 2 R3601-W2 User Manual Version: R3601-W2 V.1.2...

  • Page 3: Intended Audience

    Brief Introduction This manual provides technical information on how to configure and operate application for your R3601-W2 unit. Chapter 1: Provides an overview of R3601-W2 Chapter 2: Introduces the product Chapter 3: Introduces the configuration via WEB-based Management Intended Audience System administrators, Network engineers and Maintenance technicians.

  • Page 4: Table Of Contents

    Connecting via Ethernet WAN ................13 3.2.1 Connecting via Fiber WAN ..................14 3.2.2 Web Configuration ....................15 3.2.3 Access to the Eltek R3601-W2 configuration ..........16 3.2.4 3.3 Home ................... 17 3.4 Network Configuration ............17 3.4.1 Network Status ......................17 3.4.2...
  • Page 5 3.6.3 Reboot System ......................89 3.6.4 Backup/Restore ......................89 3.6.5 Diagnostic ........................89 3.6.6 User Management....................91 3.6.7 System Log ........................ 92 3.6.8 TR069 ........................... 93 3.6.9 Choose the menu System→TR069 to load the following page....93 3.6.10 SNMP ......................... 95 3.6.11 User Access Right ....................

  • Page 6: Eltek R3601-W2

    1 Overview The Eltek R3601-W2 is a SFP (Fiber) Gigabit Ethernet Wireless 11n Gateway. The Eltek R3601-W2 is perfectly fitting for SoHo, SME or extended networks. The device provides carriers and users with accelerated access to next-generation network services including internet and intranet access, as well as web-based research, videoconferencing, gaming applications, e-commerce, IPTV, web hosting and many more functions.

  • Page 7: Product Introduction

    WLAN is off WLAN Flash Green User data going through WLAN Solid Green WLAN interface is ready to work No VPN connection Solid Green VPN is established NO Dongle connection Solid Green 3G/4G connection is established Eltek R3601-W2 User Manual v.1.2...

  • Page 8: Packaging Content

    Reset button: Use the button to restore the device to the factory defaults.  WPS: WIFI WPS switch.  2.2 Packaging Content Following items are included in the R3601-W2 packaging content: Packaging Content 1x R3601-W2 SFP Gigabit Ethernet WLAN 11n Gateway 1x Power Adapter AC Adapter, 12VDC / 1A, Model: JY-12100.

  • Page 9: Hardware Interface

    Firewall Protection: IDS&IPS, Block Ping/ICMP/IDENT, SPI Firewall, Portscan  restriction Access control: Blocking by URL,IP Address, Mac Address, Protocol Type,  Port WIFI WLAN Standard: IEEE 802.11b/g/n(2.4GHz)  Security: WEP,WPA,WPA2,PWA-PSK,WPA2-PSK  WIFI Features: WMM,WLAN-LAN Isolation, Multi SSID(X4), AP Isolation  Eltek R3601-W2 User Manual v.1.2...

  • Page 10: Working Environment

    Environment requirement includes storage temperature, working temperature and humidity. Storage Temperature: -40ºC - 70ºC  Long Time Working Temperature: -10ºC - 50ºC  Short Time Working Temperature: -15ºC - 60ºC  Environment Humidity: 5% - 95% RH, no coagulation  Eltek R3601-W2 User Manual v.1.2...

  • Page 11: Configuration Introduction

    3 Configuration Introduction 3.1 Computer Configuration Before starting the Eltek R3601-W2 configuration, please kindly configure your computer as below, to have an automatic IP address / DNS server. To do this, you will need to configure your PC’s network settings to obtain an IP address automatically.

  • Page 12: Windows Vista-32/64

    "OK" to continue. 5. Click "Show icon in notification area when connected" then Click on "OK" to complete the setup procedures. Windows Vista-32/64 3.1.2 1. Click on "Start" -> "Control Panel" -> “View network status and tasks”. Eltek R3601-W2 User Manual v.1.2...
  • Page 13 3. Single RIGHT click on "Local Area Connection", then click "Properties". 4. Double click on "Internet Protocol Version 4 (TCP/IPv4)". 5. Check "Obtain an IP address automatically" and "Obtain DNS server address automatically" then click on "OK" to continue. Eltek R3601-W2 User Manual v.1.2...

  • Page 14: Windows 7-32/64

    2. In the Control Panel Home, click on "Change adapter settings" to continue. 3. Single RIGHT click on "Local Area Connection", then click "Properties". 4. Double click on "Internet Protocol Version 4 (TCP/IPv4)". Eltek R3601-W2 User Manual v.1.2...

  • Page 15: Windows 8-32/64

    1. Move the mouse or tap to the upper right corner and click on "Settings" and go to "Control Panel". 2. Click on "View network status and tasks". 3. In the Control Panel Home, click on "Change adapter settings" to continue. Eltek R3601-W2 User Manual v.1.2...
  • Page 16 4. Single RIGHT click on "Ethernet", then click "Properties". 5. Double click on "Internet Protocol Version 4 (TCP/IPv4)". 6. Check "Obtain an IP address automatically" and "Obtain DNS server address automatically" then click on "OK" to continue. Eltek R3601-W2 User Manual v.1.2...

  • Page 17: Mac Os X 10.6

    On the TCP/IP tab, select Using DHCP from the Configure pull-down menu 4. On the PPPoE tab, make sure that the Connect using PPPoE check box is NOT activated Click Apply Now. 5. Close the Network window. Eltek R3601-W2 User Manual v.1.2...

  • Page 18: Device Configuration

    3.2 Device Configuration Connecting via Ethernet WAN 3.2.1 The Eltek R3601-W2 is a SFP Gigabit Ethernet Gateway. It cannot be connected to the phone network, nor can it be used as an ADSL Router. 1. Connecting Internet With a network cable connect the uplink to the WAN port on the back of the device.

  • Page 19: Connecting Via Fiber Wan

    Connecting via Fiber WAN 3.2.2 The Eltek R3601-W2 is an SFP Gigabit Ethernet Gateway. It cannot be connected to the phone network, nor can it be used as an ADSL Router. 1. SFP Slot and Fiber cable connection 1.1Put the SFP into the SFP slot on the back of the R3601-W2 1.2Connect the Fiber cable with the SFP module on the back of the device...

  • Page 20: Web Configuration

    Connecting via LAN Port Please refer to chapter 4.2.1/4.2.2 point 2 or just connect the Ethernet cable to the LAN port of the Eltek R3601-W2 and the other end to the LAN Port of your computer. Connecting via Wireless LAN...

  • Page 21: Access To The Eltek R3601-W2 Configuration

    To access the web-based utility, launch the web browser on your computer and please proceed as follows: 1. Start your web browser and type the private IP address of the Eltek R3601-W2 in the URL field: 192.168.1.1 2. After connecting to the device, you will be promoted to enter username and password.

  • Page 22: Home

    The Status page shows all WAN and LAN interfaces configuration, and all physical ports connection status related to this device. 3.4.1.1 WAN Status Choose the menu Network→Status→WAN to load the following page. WAN Status Figure 3-2 Eltek R3601-W2 User Manual v.1.2...

  • Page 23: Wan Configuration

    The device supports 4 WAN interfaces:DATA, MGMT,OTHER1,OTHER2; Every WAN interface provides following five Internet connection types: Static IP,DHCP,PPPoE,PPTP,L2TP. Choose the menu Network→WAN to load the configuration show page. WAN page Figure 3-5 Select an Interface Name to load the configuration page. Eltek R3601-W2 User Manual v.1.2...
  • Page 24 Enter the IP address assigned by your ISP. If you are not clear, please consult your ISP. ► Netmask: Enter the Subnet Mask assigned by your ISP. ► Gateway: Optional. Enter the Gateway assigned by your ISP. Eltek R3601-W2 User Manual v.1.2...
  • Page 25 ► Secondary DNS: Optional. If a Secondary DNS Server address is available, enter it. ► Appoint Server IP: Optional. If network has multiple DHCP servers, enter the IP address of your ISP’S DHCP server Eltek R3601-W2 User Manual v.1.2...
  • Page 26 Enter the IP address of your ISP’s Primary DNS (Domain Name Server) manually. If you are not clear, please consult your ISP. It’s not allowed to access the Internet via domain name if the Primary DNS field is blank. Eltek R3601-W2 User Manual v.1.2...
  • Page 27 LCP echo-reply. 4) L2TP If your ISP (Internet Service Provider) has provided the account information for the L2TP connection, please choose the L2TP connection type. WAN-L2TP Figure 3-9 Eltek R3601-W2 User Manual v.1.2...
  • Page 28 ► Device Class: Optional. ► Device Type: Optional. ► Device Version: Optional. 5) PPTP If your ISP (Internet Service Provider) has provided the account information for the PPTP connection, please choose the PPTP connection type. Eltek R3601-W2 User Manual v.1.2...
  • Page 29 Optional. If a Secondary DNS Server address is available, enter it. ► Server IP: Enter the Server IP provided by your ISP. ► Username: Enter the Account Name provided by your ISP. If you are not clear, please consult your ISP. Eltek R3601-W2 User Manual v.1.2...

  • Page 30: Lan Configuration

    Optional. 3.4.3 LAN Configuration On this page, you can configure the parameters for LAN port. Choose the menu Network→LAN to load the following page. There are three parts on this page. LAN page Figure 3-11 Eltek R3601-W2 User Manual v.1.2...
  • Page 31 If Enable DHCP Server is selected, enter the End IP address to define a range for the DHCP server to assign dynamic IP addresses. This address should be in the same IP address subnet with the IP address of this LAN interface. Eltek R3601-W2 User Manual v.1.2...
  • Page 32 ► DHCP Vendor ID: Vendor class identifier List (DHCP 60 option), support at most two vendor IDs. ► IPAddress: IP address of interface for STB data service. ► Netmask: Subnet mask of interface for STB data service. ► VID: VID of IPTV VLAN. Eltek R3601-W2 User Manual v.1.2...

  • Page 33: Wlan

    ► Channel Width: Select any channel width from the drop-down list. The default setting is automatic, which can automatically adjust the channel width for your clients. If you choose to 11n or 11b/g/n Wireless Eltek R3601-W2 User Manual v.1.2...
  • Page 34 20MHz and 20/40MHz. The Service Set Identifier (SSID) is used to identify an 802.11 (Wi-Fi) network and it’s discovered by network sniffing/scanning. R3601-W2 provides up to four SSID. ► Enable: Enable or disable this entry of SSID. SSID1 can’t be disabled.
  • Page 35 ASCII(5/13 char) formats are provided. Hex(10/26 char): format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length. ASCII(5/13 char): format stands for any combination of keyboard characters in the specified length. Eltek R3601-W2 User Manual v.1.2...
  • Page 36 Personal Information Number (PIN) and Push Button Configuration (PBC).The difference between the two methods is much pretty described in their names. Eltek R3601-W2 User Manual v.1.2...
  • Page 37 ► PIN Code: If PIN mode is chosen, enter the 8 digit PIN code, and then click Connect. 2) PBC Mode If PBC mode is selected, the following page is loaded. Configure WIFI WPS-PBC Figure 3-18 Eltek R3601-W2 User Manual v.1.2...
  • Page 38 Here you can specify the transmit power of device. 100 is the default setting and is recommended. ► Enable WMM: Enable or disable the WIFI WMM function globally. WMM function can guarantee the packets with high-priority messages, being transmitted preferentially. It is strongly recommended enabled. Eltek R3601-W2 User Manual v.1.2...
  • Page 39 Enable or disable the Wifi MAC filtering function globally. ► Filtering Rules: Two MAC filtering rules are provided: Allow: allow the stations specified by entries in the list to access. Deny: deny the stations specified by entries in the list to access. Eltek R3601-W2 User Manual v.1.2...

  • Page 40: Modem

    3G Modem into USB port, the system recognized the SIM card and charges no problem. After dialing successful, 3G Modem will serve as a backup uplink usage. 1) Basic Settings Choose the menu Network→3G Modem to load the following page. Configure 3G Modem-Basic Settings Figure 3-23 Eltek R3601-W2 User Manual v.1.2...
  • Page 41 ► Data Link Backup: When enabled, if WAN uplink port is disconnected, the routing switches to the 3G link. ► Heartbeat Address: Set the heartbeat detecting address of the link, the default configuration is not required. Eltek R3601-W2 User Manual v.1.2...

  • Page 42: Port Management

    Choose the menu Network→Port Management→Port Mirror to load the following page. Port Mirror Figure 3-26 Eltek R3601-W2 User Manual v.1.2...
  • Page 43 10M Half Duplex, 10M Full Duplex, 100M Half Duplex, 100M Full Duplex, 1000M Full Duplex, Auto-Negotiation. ► Current Status: Current link status of all physical ports. Read only. Eltek R3601-W2 User Manual v.1.2...

  • Page 44: Ipv6 Configuration

    ► Default Gateway Address: Stateless,Manual. If Manual is selected, you should specify address manually. ► DNS: Stateless,Manual,DHCPv6. If Manual is selected, you should specify DNS manually. ► Enable DHCP-PD: Whether to enable DHCP-PD(prefix delegation) on WAN. Eltek R3601-W2 User Manual v.1.2...

  • Page 45: Data Service

    The Status page shows the data services information, all information is read only. 3.5.1.1 Service State The Service State page show all switch status of data services. Choose the menu Data Service→Status→Service State to load the following page. Service State Figure 3-29 Eltek R3601-W2 User Manual v.1.2...

  • Page 46: Route Table

    This page displays the ARP List; Choose the menu Data Service→Status→ARP Table to load the following page. ARP Table Figure 3-30 3.5.1.3 Route Table Choose the menu Data Service→Status→Route Table to load the following page. Route Table Figure 3-31 Eltek R3601-W2 User Manual v.1.2...

  • Page 47: Dhcp Server

    IP address for a client on the LAN, that client will always receive the same IP address each time when it accesses the DHCP server. The Reserved IP addresses should be assigned to the devices that require permanent IP settings. View Static Address Assign Configuration Figure 3-33 Eltek R3601-W2 User Manual v.1.2...
  • Page 48 When the DHCP server responds, the DHCP relay agent forwards the reply back to the DHCP client. Eltek R3601-W2 User Manual v.1.2...

  • Page 49: Nat Config

    IPv4 address. NAT was originally designed in an attempt to help conserve IPv4 addresses. NAT modifies the IP address information in IPv4 headers while in transit across a traffic routing device Eltek R3601-W2 User Manual v.1.2...

  • Page 50: Basic Settings

    PAT statically uses unique port numbers on a single outside IP address to distinguish between the various translations. Choose the menu Data Service→NAT Config→PAT Settings to load the following page. View PAT Settings Figure 3-39 Eltek R3601-W2 User Manual v.1.2...
  • Page 51 LAN port will be redirected to this host. ► Protocol: Specify the protocol used for the entry. ► Internet Interface: Specify the interface to receive requests from the internet for the entry. ► Description: Enter a name for Virtual Server entry. Eltek R3601-W2 User Manual v.1.2...

  • Page 52: Dmz Settings

    The following items are displayed on this screen: ► DMZ Public IP: The public IP address for this DMZ entry. ► DMZ Private IP: The private IP address for this DMZ entry. ► Description: Enter a description string for this DMZ entry Eltek R3601-W2 User Manual v.1.2...

  • Page 53: Firewall Config

    Configure this for abnormal packets defense and flood attack defense. Flood attack is a commonly used DoS (Denial of Service) attack, including TCP SYN, UDP, ICMP, and so on. Choose the menu Data Service→Firewall Config→Attack Defense to load the following page. Eltek R3601-W2 User Manual v.1.2...
  • Page 54 IP spoofing, the transmission can fool the machine into thinking it is sending itself a message, which, depending on the operating system, will crash the machine. Check the box to enable Land Based Defense. Eltek R3601-W2 User Manual v.1.2...

  • Page 55: Service Type

    Service Type defines the entry with protocol and port range, which can be chosen in Internet Access-Ctrl page. Choose the menu Data Service→Firewall Config→Service Type to load the following page View Service Type Configuration Figure 3-45 Eltek R3601-W2 User Manual v.1.2...
  • Page 56 3.5.4.3.1 Access Control This sub-page is used to control Internet access through IP, port, and time. Choose the menu Data Service→Firewall Config→Internet Access-Ctrl→Access Control to load the following page. View Access Control Entry Figure 3-47 Eltek R3601-W2 User Manual v.1.2...
  • Page 57 Choose a service type that defined in Service Type page. ► Active Time: Specify the time range for the entry to take effect. ► Active Day: Specify the day range for the entry to take effect. Eltek R3601-W2 User Manual v.1.2...
  • Page 58 ► Auth Mode: Choose the authentication mode of this entry. Provides four modes: Allow Multi-PC Access: Allows multiple computers to access the Internet using this account. Allow One PC Access: Only allows one computer to access the Internet using this account. Eltek R3601-W2 User Manual v.1.2...
  • Page 59 Internet for the first time. ► Push Http Url: Specifies the HTTP URL of the page you want to push. 3.5.4.4 Network Access-Ctrl 3.5.4.4.1 Choose the menu Data Service→Firewall Config→Netword Access-Ctrl→WEB to load the following page. Eltek R3601-W2 User Manual v.1.2...
  • Page 60 If IP Limit enabled, specifies the IPv6 address range that is only allowed to access the device from the Intranet via WEB. 3.5.4.4.2 TELNET Choose the menu Data Service→Firewall Config→Netword Access-Ctrl→TELNET to load the following page. Eltek R3601-W2 User Manual v.1.2...
  • Page 61 Configure Telnet Access-Ctrl Figure 3-53 Eltek R3601-W2 User Manual v.1.2...
  • Page 62 Internet Web Access: ► Allow Access: If enabled, allow access to the device from the Internet via SSH. ► IP Limit: If enabled, allow only specific IP range to access the device from the Internet via SSH Eltek R3601-W2 User Manual v.1.2...
  • Page 63 ► Keyword Filter: If enabled, packet filtering is enabled by keyword. ► Policy: The policy for filtering web page, Deny and Allow. You can export all the keywords as a file. Of course, you can also import a file. Eltek R3601-W2 User Manual v.1.2...
  • Page 64 You can export all the IP addresses as a file. Of course, you can also import a file. 3.5.4.5.3 MAC Filter On this page, you can control the Internet access of local hosts by specifying their MAC addresses. Choose the menu Data Service→Firewall Config→Filter Strategy→MAC Filter to load the following page. Eltek R3601-W2 User Manual v.1.2...
  • Page 65 There are two ways to add MAC: Artificial designated MAC: You can manually enter a MAC. Using Studying MAC: You can choose one or more MAC devices learned. Add a MAC Filter Entry Figure 3-58 Eltek R3601-W2 User Manual v.1.2...

  • Page 66: Qos

    QOS feature is enabled by default, based on 802.1P, strict priority scheduling mode. The device supports four priority queues, when QOS feature enabled. Choose the menu Data Service→QoS→Basic Settings to load the following page. Configure QoS Basic Settings Figure 3-60 Eltek R3601-W2 User Manual v.1.2...
  • Page 67 TOS/DSCP of upstream packets, the mapping relationship is as follows: DSCP priority value 802.1p priority 8-15 16 ~ 23 24 ~ 31 32 to 39 40 ~ 47 48 ~ 55 56 to 63 Eltek R3601-W2 User Manual v.1.2...
  • Page 68 ► Outgoing Rate Limit: Enter Outgoing maximum rate, which must is times of 32Kbsp. 3.5.5.3 Flow Rate Limit Choose the menu Data Service→QoS→Flow Rate Limit to load the following page. View QoS Flow Rate Limit Entry Figure 3-62 Eltek R3601-W2 User Manual v.1.2...
  • Page 69 If Application is selected: ► Application Protocol: Such as HTTP, HTTPS, FTP, TFTP, SMTP, POP3, TELNET, etc. If Custom is selected, the following page will be loaded: Configure Custom of Qos Flow Rate Limit Figure 3-64 Eltek R3601-W2 User Manual v.1.2...
  • Page 70 The value of remarking 802.1P. ► Remark DSCP: Check the box to enable DSCP remarking. ► DSCP Value: The value of remarking DSCP. 3.5.5.5 ACL Choose the menu Data Service→QoS→ACL to load the following page. Eltek R3601-W2 User Manual v.1.2...
  • Page 71 Figure 3-68 The following items are display on this page: ► Src IP/Netmask: The source IP address and netmask of packets, such is 192.168.100.1/255.255.255.0. ► Dest IP/Netmask: The destination IP address and netmask of packets. Eltek R3601-W2 User Manual v.1.2...
  • Page 72 ► Remark DSCP: Change the DSCP of packets matched with the rule. ► Priority: Change the scheduling queue of packets matched with the rule. ► Maximal Bandwidth: Limit the bandwidth of packet matched with the rule. Eltek R3601-W2 User Manual v.1.2...

  • Page 73: Ddns

    If CUSTOM is selected, specify server URL of the device. ► Dyn DNS Server Name: If CUSTOM is selected, specify dyndns DNS server name of custom self-defined. ► Dyn DNS Server Url: If CUSTOM is selected, specify dyndns DNS server URL of custom self-defined. Eltek R3601-W2 User Manual v.1.2...

  • Page 74: Vpn

    Table depicts the difference between L2TP and PPTP. Protoc Media Tunnel Length of Authenticat Header PPTP IP network Single tunnel 6 bytes at least supported L2TP IP network of UDP Multiple 4 bytes at least Supported tunnels Eltek R3601-W2 User Manual v.1.2...
  • Page 75 ► Password: Enter the password of PPTP tunnel. It should be configured identically on server and client. ► Binding IP: Enter the IP address of the client which is allowed to connect to this PPTP server. ► Description: Enter the humane readable description for this account. Eltek R3601-W2 User Manual v.1.2...

  • Page 76: L2Tp Server

    Click the Index in the entry you want to modify. If you want to delete the entry, select it and click the Del. Click the Add button to add a new entry. Add or Modify L2TP Client Entry Figure 3-76 Eltek R3601-W2 User Manual v.1.2...
  • Page 77 Phase 2. During phase 2, the IKE peers use the ISAKMP SA established in Phase 1 to negotiate the parameters for security protocols in IPSEC and create IPSEC SA to secure the transmission data. Eltek R3601-W2 User Manual v.1.2...
  • Page 78 MD5: MD5 (Message Digest Algorithm) takes a message of arbitrary length and generates a 128-bit message digest. SHA1: SHA1 (Secure Hash Algorithm) takes a message less than 2^64 (the 64th power of 2) in bits and generates a 160-bit message digest. Eltek R3601-W2 User Manual v.1.2...
  • Page 79 Specify a unique name to the IKE policy for identification and management purposes. The IKE policy can be applied to IPSEC policy. ► Operation Mode: Select the IKE Exchange Mode in phase 1, and ensure the remote VPN peer uses the same mode. Eltek R3601-W2 User Manual v.1.2...
  • Page 80 Click the Index in the entry you want to modify. If you want to delete the entry, select it and click the Del. Click the Add button to add a new entry. Add or Modify IPSEC Safety Proposal Entry Figure 3-82 Eltek R3601-W2 User Manual v.1.2...
  • Page 81 Eltek R3601-W2 User Manual v.1.2...
  • Page 82 3.5.7.4.4 IPSEC Safety Policy In this table, you can view the information of IPSEC policy. Choose the menu Data Service→VPN→IPSec→IPSEC Safety Policy to load the following page. View IPSEC Safety Policy Configuration Figure 3-83 Eltek R3601-W2 User Manual v.1.2...
  • Page 83 VPN→IPSec→IKE Safety Policy page. ► Enable Safety Prososal: If enabled, Select IPSEC Proposal. If there is no policy selection, add new IPSEC proposal on VPN→IPSec→IPSEC Safety Proposal page. Up to four IPSEC Proposals can be selected. Eltek R3601-W2 User Manual v.1.2...

  • Page 84: Routing

    ► Next Hop Interface: Specify the interface of next hop for current route ► Next Hop Address: Specify the address of next hop for current route ► Valid: Show the status of current route. Eltek R3601-W2 User Manual v.1.2...

  • Page 85: Policy Route

    The configuration options of Ipv6 is similar to Ipv4, the prefix length is equal to mask of Ipv4 address. 3.5.8.2 Policy Route Choose the menu Data Service→Route→Policy Route to load the following page. View Policy Route Figure 3-87 Eltek R3601-W2 User Manual v.1.2...
  • Page 86 ► Destination Port: Specify port or port range of destination in the rule entry. ► Active Time: Specify the active time range for the rule entry. ► Active Day: Specify the active days for the rule entry. Eltek R3601-W2 User Manual v.1.2...
  • Page 87 Specify the encryption mode of key, TEXT(plaintext),MD5(cipertext). ► Key Type: Specify the key from Simple String or Key Chain. ► Simple String: If select Simple String in item of Key Type, enter simple string as key. Eltek R3601-W2 User Manual v.1.2...

  • Page 88: Advanced Parameters

    Watching home videos  Listening to favorite tunes throughout the house  The Digital Living Network Alliance (DLNA) is a non-profit collaborative trade organization established by Sony in June 2003, which is responsible for defining Eltek R3601-W2 User Manual v.1.2...

  • Page 89: Multicast

    Choose the menu Data Service→Multicast to load the following page. Configure Multicast Figure 3-94 The following items are displayed on this screen: ► Enable IGMP Proxy: Enable or disable the IGMP proxy function globally. Currently, IGMP proxy is mainly used for IPTV. Eltek R3601-W2 User Manual v.1.2...

  • Page 90: Usb Storage

    ► Access Right: Select access right from pull-down list, Read or Read/Write. 2) USB Storage Scan the partitions of USB Storage by click Rescan button and umount specified partition by clicking Umount button. Click start to start service, click stop to stop service. Eltek R3601-W2 User Manual v.1.2...

  • Page 91: System

    Configuration to load the following page. Time Manual Configuration Figure 3-99 The following items are displayed on this screen: ► Configuration mode: Specify configuration mode of time, Auto Configuration or Manual Configuration, default is Manual Configuration. Eltek R3601-W2 User Manual v.1.2...
  • Page 92 ► End Hour of Day: Specify the end hour of DST, range from 0 to 23 in one day. 2) Auto Configuration Choose Auto Configuration to load the following page: Time Auto Configuration Figure 3-100 Eltek R3601-W2 User Manual v.1.2...
  • Page 93 ► Update Interval: Specify update interval for role as NTP client. 3.6.2 Export Configuration Configuration exporting via WEB interface is available. Click the "Export Configuration File" to export the configuration file. Web interface configuration index: SystemUpgrade( Configuration). Eltek R3601-W2 User Manual v.1.2...

  • Page 94: Reboot System

    ► Restore Factory Configurations: To reset to factory parameters. 3.6.5 Diagnostic 3.6.5.1 Ping Choose menu “SystemDiagnosticPing”, and then you can use Ping function to check connectivity of your network in the following screen. Ping Diagnostic Figure 3-102 Eltek R3601-W2 User Manual v.1.2...
  • Page 95 Click Stop button to stop capturing the packets. Click "*.pcap" to open or download the capture packets file. Click "clean" to delete all the packets file. Click Refresh button to refresh the web page. Eltek R3601-W2 User Manual v.1.2...

  • Page 96: User Management

    ► Confirm Password: Enter the new password again to confirm for specified user, not more than 32 characters, and the space is not supported. Click the Save button when finished. Eltek R3601-W2 User Manual v.1.2...

  • Page 97: System Log

    Enter the IP address of the Log Server. ► Log Server Port: Enter the port that Log service used. Click the Save button when finished. 3.6.7.2 Log Display Choose the menu System→System Log→Log Display to load the following page. Eltek R3601-W2 User Manual v.1.2...

  • Page 98: Tr069

    The serial number of device. Read only. ► Enable: Enable or disable the TR069 function globally. ► ACS Address: Enter the IP address or domain name of ACS. ► ACS Port: Enter the port of ACS. Eltek R3601-W2 User Manual v.1.2...
  • Page 99 ACS. Read only. ► Fail Reason: Show reason for the failure when CPE making a connection to the ACS. Read only. Click the Save button when finished. Click Refresh button to refresh the web page. Eltek R3601-W2 User Manual v.1.2...

  • Page 100: Snmp

    Backup Register Server. ► Backup Server Port: Enter the port of Backup Register Server. ► Registration Status: The status of registration. Read only. Click the Save button when finished. Click Refresh button to refresh the web page. Eltek R3601-W2 User Manual v.1.2...

  • Page 101: User Access Right

    Choose the menu System→User Access Right to load the following page. View users Figure 3-110 If you want to change the user access right, click detail in the entry to load the following page. Eltek R3601-W2 User Manual v.1.2...

  • Page 102: Apply

    Modify User Access Right Figure 3-111 3.7 Apply Follow the prompts,Some p arameters will take effect after click the button of “Apply”. Apply Figure 3-112 Eltek R3601-W2 User Manual v.1.2...

  • Page 103: Print Function

    The device supports to link printer port and provides share printing capabilities to other computers. To use print function, you need do the following steps. 1. Add Printer Open the windows of the Control Panel, select Printers and Faxes, and add the printer Add Printer Figure 3-113 Eltek R3601-W2 User Manual v.1.2...
  • Page 104 Select "Local printer attached to this computer." Connecting local printer Figure 3-114 3. Create a new port Select "Create a new port" and select "Standard TCP / IP Port" Create a new port Figure 3-115 Eltek R3601-W2 User Manual v.1.2...
  • Page 105 Click Next, and add IP devices, assuming the device IP is 192.168.1.1. Add IP LAN devices Figure 3-116 5. Configure printer port Select "Custom", click "Settings" to confirm the agreement as "RAW (R)" Configuer printer port Figure 3-117 Eltek R3601-W2 User Manual v.1.2...
  • Page 106 According to the printer manufacturer and printer type, select the appropriate driver. If the computer has not printer driver, you need to install the printer driver. After adding the printer, you can print through the USB printer. Add Printer Driver Figure 3-118 Eltek R3601-W2 User Manual v.1.2...

  • Page 107: Troubleshooting

    STEP2: Enter the username and password to go into command line configuration mode. STEP3: do soft reset by command reset. NOTE: CLI console can be used if only already configured to allow telnet access, the default is forbidden. Eltek R3601-W2 User Manual v.1.2...
  • Page 108 Eltek R3601-W2 User Manual v.1.2...
  • Page 109 How do I upgrade the firmware on my device? To upgrade the firmware, please follow the steps below. STEP1: Open your web browser and type in the LAN IP address of the device (192.168.1.1 by default). Eltek R3601-W2 User Manual v.1.2...
  • Page 110 STEP3: Check validity of Internet connection. Click the System tab at the top, then click the Diagnostic Tab on the left navigation, choose Ping menu. Try to ping Internet IP or domain name to judge validity of Internet connection. Eltek R3601-W2 User Manual v.1.2...
  • Page 111 And then, check the parameters of WAN connection is correct, login web console, Click the Network tab at the top, then click the WAN Tab on the left navigation. Choose the interface you used for WAN connection Eltek R3601-W2 User Manual v.1.2...
  • Page 112 DNS. If you can’t locate the problem of connection from above check, please contact us. NOTE: In fact, if the NET Led is steady green, accordingly the WAN status should be connected in STEP2. Eltek R3601-W2 User Manual v.1.2...

  • Page 113: Declaration Of Conformity

    5 Declaration of Conformity Eltek R3601-W2 User Manual v.1.2...
  • Page 114 Eltek Technologies Ltd., Switzerland Disclaimer Eltek Technologies Ltd., Switzerland reserves the right to change the document from time to time at its sole discretion, and not to make the notice to anyone in advance. Eltek R3601-W2 User Manual v.1.2...

Table of Contents