Pioneer XV-DV88 Service Manual page 83

QQ
3 7 63 1515 0
Description
FL
of Error
F5 Tray being pushed
F8 Loading timeout
FC Focus
Error codes that are displayed on the FL display by using the remote control unit (Device error)
To display : ESC + DISPLAY + DISPLAY ; Location of the display : At the two digits of left of the FL display
FL Description of Error
AV1 access error
bit3=1 08 etc.
(read, write NG)
bit2=1 04 etc. MY CHIP access error
bit1=1 01 etc. SRAM access error
TE
L 13942296513
www
.
http://www.xiaoyu163.com
Causes if with a DVD
The tray switch that had been Open mode was forcibly changed to a mode other than
Open by an external force.
Loading, unloading or clamping could not be completed within a specified time (about
5 seconds).
The following error occured eight times.
(1) Focus ON sequence could not be completed even if more than two seconds after
the focus ON command (to the servo DSP) was sent.
(2) Focus IN sequence was finished, actually focus IN was not completed.
Causes if with a DVD
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Causes if with a CD
Causes if with a CD
Q Q
3 6 7 1 3 1 5
co
.
XV-DV88, XV-DV77
9 4 2 8
Operation of the Unit
Closes
Reverses the loading
direction. It timeout is
repeated upon retry, the
unit stops.
Stops wherever possible
then opens (stops in the
case of side B).
Operation of the Unit
No operation or it becomes debugging
indication if the power is able to ON.
0 5 8 2 9 9 4 2 8
m
9 9
9 9
83