Control Panel - Westinghouse WHTS4S01 Instruction Manual

CONTROL PANEL

1. REHEAT FUNCTION
If left for too long after toasting, the bread may become cold. It may be reheated by
and pressing the loading handle down and pressing the reheat button to activate the
reheat function.
2. DEFROST FUNCTION
When using bread straight from the freezer, the defrost function may be used. Set
the browning control to the desired browning position and press the loading handle
down. After the loading handle has been pressed down, press the defrost button.
Ensure to watch the bread in case of burning.
3. BAGEL SETTING
When heating bagels and other doughy buns you may use the bagel setting. This
setting is designed to heat just one side of the toasting slot so please position your
bagel, crumpet or bun accordingly. The 'D' indicators on the top of the toaster indicate
the side of the toasting slot that will be heated. The flat side of the 'D' will be the
side that will be heated during the bagel function operation. Place the bagels in the
toasting slots, selected the desired browning control position, depress the loading
handle then press the bagel button.
4. CANCEL BUTTON
The Cancel button will immediately stop your toasting cycles. Once pressed, all
elements will cease heating and your bread/bagel will pop back up.
5. HIGH LIFT LEVER
The high lift lever is designed to lift breads, bagels and crumpets higher than the
original preset level allowing extraction of small slices of bread or crumpets with ease.
Once the toasting cycle has finished and the lever has popped up to its standard
preset position, simply push the lever further upwards for additional lift and extract
your toasted items.
6