Tilt Adjustment - Sony VPL-HS3 Service Manual

2-5. Tilt Adjustment

1. Set the Factory mode to "Device Adjust/OTHER".
2. Adjust the stand and put the main unit into the
horizontal state. (The horizontal state of this unit is
forward tilted by _4 d.)
A
Align the A with the center position
of the B.
_4d
Lever
3. Then, enter the X TILT value to C0.
4. Set the unit upward in vertically.
5. Then, enter the X TILT value to C1.
6. Set the unit downward in vertically.
7. Then, enter the X TILT value to C2.
8. Save the each values of C0, C1 and C2 described in
step3, 5 and 7.
2-12
B
Stand
VPL-HS3