Mercedes-Benz 2004 G 500 Operator's Manual page 129

Selecting display (speed display or out-
side temperature)
Move the selection marker with
the æ or ç button to the
INSTRUMENT CLUSTER submenu.
Press button j or k repeatedly
until you see this message in the dis-
play: SELECT DISPLAY .
The selection marker is on the current
setting.
Press æ or ç to select the dis-
play permanently shown in the multi-
function display.
Lighting submenu
Access the LIGHTING submenu via the
TINGS menu. Use the LIGHTING
to change the lamp and lighting settings on
your vehicle. The following functions are
available:
Function
Set daytime running lamp mode
(USA only)
Set locator lighting
Exterior lamps delayed
switch-off
Interior lighting delayed
switch-off
Setting daytime running lamp mode
(USA only)
Move the selection marker with
the æ or ç button to the
ING submenu.
Controls in detail
Press button j or k repeatedly
until you see this message in the dis-
SET-
play:
LIGHT CIRCUIT HEADLIGHT MODE
submenu
The selection marker is on the current
setting.
Page
129
130
Press æ or ç to select manual
131
or daytime running lamp (constant)
mode. This function is not available in
132
countries where daytime running
lamps are mandatory.
With daytime running lamp mode se-
lected and the exterior lamp switch at
position 0, the following lamps will
come on automatically when the en-
LIGHT-
gine is turned on:
Parking lamps and low beam head-
lamps
License plate lamps
Control system
.
129