Mercedes-Benz 2003 G 500 Operator's Manual page 124

Controls in detail
Control system
Lighting submenu
Access the submenu via the
LIGHTING
menu. Use the
TINGS LIGHTING
to change the lamp and lighting settings on
your vehicle. The following functions are
available:
Function
Set daytime running lamp mode
(USA only)
Set locator lighting
Exterior lamps delayed
switch-off
Interior lighting delayed
switch-off
124
Setting daytime running lamp mode
(USA only)
SET-
submenu Move the selection marker with
the æ or ç button to the
submenu.
ING
Press button j or k repeatedly
until you see this message in the dis-
Page
play:
LIGHT CIRCUIT HEADLAMP MODE
see
The selection marker is on the current
below
setting.
125
125
126
Press æ or ç to select manual
or daytime running lamp (constant)
mode. This function is not available in
countries where daytime running
lamps are mandatory.
With daytime running lamp mode se-
lected and the exterior lamp switch at
position 0, the following lamps will
come on automatically when the en-
LIGHT-
gine is turned on:
Parking lamps and low beam head-
lamps
. License plate lamps
i
If you turn the exterior lamp switch to
another position, the corresponding
lamp(s) will switch on.
For safety reasons, resetting the
submenu to factory settings
LIGHTING
( page 120) will not reset the daytime
running lamp mode.
In the display you will then see the mes-
sage:
LIGHTING – CANNOT BE COM-
PLETELY RESET TO FACTORY SETTINGS
WHILE DRIVING
.