Mercedes-Benz 2002 E -Class Wagon Operator's Manual page 287

Instruments
Operation
and controls
Tires, Wheels
6. Insert jack arm fully into the tube hole up to the
stop. Place jack on firm ground. Position the jack so
that it is always vertical (plumb-line) as seen from
the side (see arrow), even if the vehicle is parked on
an incline.
7. Jack up the vehicle until the wheel is clear of the
ground. Never start engine while vehicle is raised.
Instrument
Driving
cluster display
284
P40.10-2133-26
Practical hints Car care
1
8. Unscrew upper-most wheel bolt and install
alignment bolt (1) supplied in the tool kit. Remove
the remaining bolts. Keep bolt threads protected
from dirt and sand.
9. Remove wheel. Grip wheel from the sides. Keep
hands from beneath the wheels.
Technical
Index
data
P40.10-2134-26