Insignia NS-MTA1875 Quick Setup Manual

PACKAGE CONTENTS

• Travel Converter & Adapter
• Quick Setup Guide
3-prong blades

FEATURES

Round pins
Plug
selector
Flat angled and
parallel blades
Power indicator
Mode
Converter/adapter switch
outlet
Before using your new product, please read
these instructions to prevent any damage.
Check out these important
BE
safety instructions to keep
CAREFUL!
yourself and your devices safe.
• Before using the converter/adapter, check the product you
intend to connect to the converter/adapter for the
manufacturer' s voltage and wattage rating, which should be
located on the product.
Caution: Adapter mode does not convert voltage. To avoid damaging
your device, select the Converter mode when appropriate.
• The Converter cannot be used with low-wattage appliances
(0–25W).
• The converter is designed to be used only for short periods of
time (approximately 10 minutes).
• Do not leave the converter/adapter in the power outlet when
not in use. Do not continue to use the converter/adapter if it is
not working properly, has been damaged, or dropped in water.
• Check your appliance label to see if it requires less than 2.5A.
• No grounding. This product is for use with unearthed or
double-insulated appliances only.
• The adapter-only function should be used with dual-voltage
appliances. The adapter/converter combo function should be
used with single-voltage appliances.
Warning: This product is intended for adult use. This product is NOT
intended for use by unsupervised children. Choose proper settings and plug
in this product before directly supervising children using devices connected
to this product.
MAKING SURE YOUR DEVICE IS
COMPATIBLE
Warning: Failure to select the correct voltage setting could damage
your device.
Adapter mode
1 Determine the voltage of the power outlet you want to use.
See the table on the back for common voltages.
2 Check the voltage of the device you want to connect to the
power outlet.
3 Compare the power outlet voltage to your device' s voltage,
then use the table below to decide which mode to use
(adapter or converter).
Note: The voltage of some devices will be a range. If your power
outlet voltage is in the range of your device' s voltage (for example, a
120-240V device and a 240V power outlet), use ADAPTER mode.
Quick Setup Guide |
Travel Converter & Adapter
The power outlet Slide the mode
switch to:
voltage is:
• The same as your device's ADAPTER
voltage
• In the range of your device's
voltage
• 100V and your device is 120V
• In a country with 110-120V AC
• Greater than your device's CONVERTER
voltage
• In a country with 220-240V AC
• Less than your device's voltage Your device is not compatible.
Do NOT use this
converter/adapter with your
device
Notes:
• Use Adapter mode for dual-voltage devices (those listed as 110
V/220 V AC, 120 V/240 V AC).
• Use Adapter mode for devices such as laptop computers and
battery chargers because they automatically adjust to 110V or
220V power.
NS-MTA1875 / NS-MTA1875-C
4 Check the wattage of your device.
If you use ADAPTER mode:
Device wattage is: Instructions:
275W max. at 100-120V You can use this adapter.
575W max. at 220-240V See "Selecting your plug"
for further instructions.
576W or more Your device is not
compatible. Do NOT use this
adapter with your device.
If you use CONVERTER mode:
Device wattage is: Instructions:
0~25W Your device is not
compatible. Do NOT use this
converter with your device.
26~1875W You can use this converter.
See "Selecting your plug"
for further instructions.