Installing A 2.5-Inch Hard Drive - ASROCK M8 Use Manual

3.1.5.2 Installing the Hard Drive to the ODD + 2.5" HDD Tray
1. To install the hard drives, you have to remove the PSU.
2. The ODD + 2.5" HDD Tray fits a slim slot-in optical disk drive (ODD) and a 2.5-inch
hard drives.
3. Hard drives are not included with this system.

Installing a 2.5-Inch Hard Drive

1. Remove the PSU.
Unplug the PSU power cable.
Remove the two screws securing the power supply unit.
Slide the PSU to the right until it releases. Lift the PSU and set it aside.
1
2
M8
25