ASROCK M8 Use Manual page 21

3.1 Installing System Components
3.1.1 Removing the Side Panels
To remove the side panels, you have to unlock the keylock on the top cover using the system
key. Before unlocking, power off the system and unplug the power cord. After the side panel
are replaced, make sure to lock the keylock on the top cover and then power on the system.
1. Place the system in an upright position.
2. Unlock the system keylock on the top cover.
3. Remove the side panels.
2
Pull the right side panel away from the chassis.
Pull the left side panel away from the chassis.
1
M8
17