Troubleshooting - Globalstar GPDK-1700 User Manual

You can also use menus to adjust the volume. Refer to the phone user manual.
Connecting to a personal computer
Connecting a Globalstar data cable (GDC-1700) from your computer or other device to the data port of
the kit allows the phone to send and receive data. See Component parts, page ?.
Note
You cannot use the phone to talk while sending and receiving data.
Privacy Headset
Privacy headset operation
Setting up the headset
Before start to drive:
1. Remove rubber plug from the headset jack in the left side of the phone. Rotate rubber plug
toward the antenna.
2. Plug the privacy headset into the headset jack on the phone.
3. Place the headset over your ear.
4. Speak in the direction of the headset microphone instead of the Hands-Free microphone. You
will hear the other party through the earplug.
5. Use the volume keys or Preferences menu on your phone to adjust the volume of the earplug
when you on a call. See the user manual.
Using the headset
To make a call with the headset:
1. Dial the desired number on the keypad of your phone.
2. Press (insert send button line art drawing)
When you use the headset, the speaker and microphone are muted, and you can speak in privacy.
To receive a call with the headset:
When the phone rings, press any key except (insert line art drawing of "end" button). See the
•
phone user manual for information on the AnyKeyAnswer option.
To end a call with the headset:
• Press (insert line art drawing of "end" button)
To switch from the headset to hands-free mode:
Unplug the headset from the headset jack when you are not driving.
•

Troubleshooting

If you have problems using the portable docking kit, look at these possible solutions before calling your
service provider or authorized Globalstar agent.
Table 1. Error messages