Globalstar GPDK-1700 User Manual page 11

Operation
Using the phone in a vehicle
Attaching the phone to the Globalstar Portable Docking Kit
1. Remove the kit connector cover label from the back of the phone.
Insert line art drawing
2. Remove rubber plug from the connector at the bottom of the phone. Rotate rubber plug
toward antenna.
3. Insert the connector on the bottom of the cradle into the connector on the phone.
4. Push the phone down and back until it locks into place. You should hear a click.
5. To remove the phone, press the release button at the top of the cradle, and gently remove the
phone.
6. Replace the rubber plug in the connector.
Insert line art drawing on page 18 of the GIK-1700 User Manual
! Caution
Do not pull the phone out of the cradle without first pressing the release button. If you do so,
you could damage the phone and the cradle.