Audio Operation - Krell Industries Foundation Processor Owner's Reference Manual

Audio Operation

Press the Enter button to enter the Audio Operation sub menu.
Dolby PLIIx Setup
Press the Enter button to enter the Dolby PLIIx sub menu.
CENTER WIDTH
The amount of center output signal can be spread to the left and right channel outputs. The adjustment range is from
0 (lowest) to 7 (highest, effectively mutes the center channel). Press the enter button and the cursor will start blinking.
Press the Up or Down button to select the desired value.
Press the Enter button to confirm choice. Press the Up or Down Button to select another parameter to edit.
DIMENSION
The sound field can be moved toward the front or rear loudspeakers, to achieve a more suitable balance from all
loudspeakers. The adjustment range is 0 (maximum surround) to 6 (maximum center). The default setting is 3 (neutral).
Press the enter button and the cursor will start blinking. Press the Up or Down button to select the desired value.
Press the Enter button to confirm choice. Press the Up or Down Button to select another parameter to edit.
SURROUND MODE
Press the Enter button and the cursor will start blinking. Press the Up or Down button to select between Auto and
Manual.
In Auto, the Foundation will engage Dolby Pro Logic IIx anytime an incoming signal is encoded with Dolby Pro Logic
IIx. If the signal changes to a non Dolby Pro Logic IIx , the Foundation will revert to the new signal.
In Manual, the Foundation will not add the Dolby Pro Logic IIx decoding automatically. Pressing the Mode button on
the remote control until Dolby Pro Logic IIx mode is displayed is the only way to engage Dolby Pro Logic IIx decoding.
Press the Enter button to confirm choice and then press the left button to return to the Audio operation menu.
DTS Neo:6 Setup
Press the Enter button to enter the DTS Neo:6 sub menu.
DTS NEO:6 derives a 6.0 signal from two-channel source material. The center gain adjusts the amount of center
channel information present in the left and right loudspeakers. The adjustment range is 0 (no center channel
information; wide sound field) to 5 (maximum level of center channel information subtracted from the left and right
channels; narrow sound field). Press the enter button and the cursor will start blinking. Press the Up or Down button to
select the desired value.
Press the Enter button to confirm choice. Press the Up or Down Button to select another parameter to edit.
Dynamic Range
Press the Enter button and the Mode field will start flashing. Press the Up or Down button to select the desired
Dynamic Range setting.
Max/Off is the default and provides maximum dynamic range
Normal/Auto uses any dynamic range information encoded into a source's bit stream
Night/On applies 22dB worth of compression to all incoming signals.
Press the Enter button to confirm choice and then press the left button to return to the Audio operation menu.
EQ
EQ mode turns the ARES EQ on or off. Press the Enter button to enter the EQ sub menu. Press Enter and the Mode field
will blink. Press the Up or Down button to select on or off.
Foundation Processor 12