Step 4: Connect Your Xmp3 Radio - XM XMp3 Installation Manual

Vehicle Installation

Step 4: Connect your XMp3 Radio

1 Plug the antenna jack into
2 Plug the power adapter jack into
NOTE! Some car CLAs remain powered even when the car is turned off . To avoid battery
drain, it is recommended to unplug the power adapter or remove the XMp3 from the
dock if leaving the car unattended for an extended period .
3 Plug the audio adapter jack into
• Use the audio cable (included) if your vehicle has an audio input jack .
• Use the cassette adapter (sold separately) if your vehicle has a built in
cassette player .
Insert mount into the cradle then slide it up until it feels tightly in place .
4
Insert your XMp3 radio into the cradle .
5
NOTE! If your car does not contain a cassette player or an audio input, you will need to
use either the XM SureConnect (sold separately) or the FM Direct (sold separately) .
12
antenna on the cradle .
5V DC on the cradle .
line out on the cradle .