Replacement Bulbs - GMC 2013 Terrain Owner's Manual

Bulb Assembly
1. Bulb Socket
2. Bulb
3. Lamp Assembly
To replace one of these bulbs:
1. Open the liftgate partway. See
Liftgate on page 2 8.
2. Push the left end of the lamp
assembly toward the right.
3. Pull the lamp assembly down to
remove it from the liftgate.
4. Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3).
5. Pull the bulb (2) straight out of
the bulb socket (1).
6. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install it into the lamp assembly.
7. Push the lamp assembly into the
liftgate engaging the clip side
first.
8. Push on the lamp side opposite
the clip until the lamp assembly
snaps into place.
I n f o r ma t i o n P r o v i d e d b y :
Vehicle Care

Replacement Bulbs

Exterior Lamp
Auxiliary Taillamp
Back-Up Lamp
Fog Lamp
Headlamp
High Beam
Headlamp
Low Beam
License Plate Lamp
Parking Lamp/Turn
Signal Front
Sidemarker Front
Taillamp/Turn Signal 3057K RD
Lamp/Stop Lamp/
Sidemarker
For replacement bulbs not listed
here, contact your dealer.
10-31
Bulb
Number
161
921
H11 LL
9005LL
H11 LL
W5WLL
7444NA
194