Memorex MKS8590 User Manual page 12

4
3
Press the CD+G SKIP/SEARCH
o 1 or n 2 button to select the
first track that you wish to
program. When the desired track
number blinks in the display,
press the CD+G PROG. button „
again.
7
2
To clear programmed playback, while in the Stop mode, press the CD+G PROG. button followed by the
CD+G STOP (I) button or open the CD compartment door.
To check the programmed tracks, while in the Stop mode, press the CD+G PROG. button repeatedly to
view the programmed tracks.
PROGRAMMED REPEAT
1
It is also possible to use the
Program and Repeat functions
together to repeat a specific
program indefinitely. First, program
the tracks you wish to hear in the
order you wish to hear them, as
described above. Then, press the
CD+G
REPEAT button twice. The
PROGRAM indicator will blink and
the REPEAT indicator will light.
OPERATION (CONTINUED)
5
3
Press either
SKIP/SEARCH o 1 or n 2 button
to select the next track you wish to
program. When the desired track
number blinks in the display,
press the CD+G PROG. button „
again.
Press the CD+G PLAY/PAUSE (®p) button ‚ to begin programmed
playback. The PROG. indicator will blink and playback will begin on
the first track that you programmed. The player will continue to play all
of the tracks that you programmed in the order in which you
programmed them. When the last programmed track has been played,
the player will stop and the display will again show the total number of
tracks on the disc. If you press the CD+G PROG. button ƒ and then
press the CD+G PLAY/PAUSE (®p) button ‚ again, playback will
start on the first track you programmed and will continue until all the
programmed tracks have been played.
2
Press the CD+G PLAY/PAUSE
(®p) button
Programmed Repeat playback.
The player will play the tracks you
selected in the order in which you
programmed them. When the last
track in the program has been
played, the entire program will
begin again.
11
6
3
the CD+G Repeat step 5 until you have
programmed the desired track
numbers into the CD Program
Memory.
When the memory is full, "- -" will
blink in the display.
3
Programmed Repeat playback
will continue indefinitely until you
to begin
press the CD+G STOP (I) button
or open the CD compartment
door.