Detaching.the.arm/Stand.(For.vesa.wall.mount) - Asus VW 198 Series User Manual

2.2 Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VW98/V193/VW171 Series LCD monitor is specially designed for
VESA wall mount.
To detach the arm/stand:
. Remove the arm cover.
2. Have the front of the monitor face down on a table.
3. Use a screwdriver to remove the three screws on the stand of the monitor as
the below drawing shows.
4. Detach the arm from the monitor.
•
•
The VESA wall mount kit (00 mm x 00 mm) is purchased separately.
2-2
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Hold the stand of the monitor when you remove the screws.
screws
Chapter 2: Setup