Memorex iTrek Mi3001 Instructions Manual page 5

LOCATION OF CONTROLS (CONTINUED)
REMOTE
1. Battery Compartment
(Side of Unit)
2. TUNE Down/Skip o
Button
3. VOLUME Down Button
4. MODE Button
REMOTE CONTROL PART NO. A -0MI 3000-02*
*Consumer Replaceable Part (See page 17 to order.)
NOTES:
• When the unit is on, press and hold the POWER/PLAY/PAUSE
(®p) button on the remote for five seconds, the display will turn off
and the unit will be in Standby mode. Within five minutes, press any
button on the main unit or the remote to activate the unit again. If
there is no signal input for five minutes in Standby mode, the unit
will turn off.
• For the Belt Clip, simply clip it to a non-slip location such as your
belt, purse or backpack.
5. VOLUME Up Button
6. BASS Button
7. POWER/PLAY/PAUSE
(®p) Button
8. TUNE Up/Skip n Button
9. Belt Clip
4