Memorex iTrek Mi3001 Instructions Manual page 13

SETTING THE RADIO PRESETS (20 for FM)
1
Follow Steps 1-3 on the previous
page to tune a station. Press the
SET button; "MEMO" will appear
and "1" (if no presets have ever
been set), will blink in the display.
RETRIEVING RADIO PRESETS (20 for FM)
1
Follow Steps 1-2 on the previous
page to turn the unit on and select
Tuner mode.
NOTE: The preset memories will be saved for a few minutes, if the unit is
without power (no batteries/AC adapter isn't connected/power failure); but, the
preset memories will be erased if the unit is without power (no batteries/AC
adapter isn't connected/power failure) for a long period of time.
OPERATION (CONTINUED)
2
2
Press the TUNE Up/Down/Skip n /
o buttons 1 to select a desired
Preset (1-20). Press the SET
button 2 again to confirm, the
station will be saved into memory.
Repeat to program up to 20
Presets, as desired.
2
1
Press the PRESET button
followed by the TUNE Up/Down/
Skip n / o buttons 2 until the
desired Preset number appears in
the display.
12
1
1
2
2
1,