Table of Contents
Advertisement
Record turntable
Mounting the Dust Cover
The dust cover has an alumi-
nium panel which contains
the hlnge and spring system
proper. To secure this panel
to the turntable unit, proceed
as follows:
I
Turn two screws in the
rear corners in the boltom
of the turntable unit anti-
clockwise, pressing a fin-
ger against the surface of
the lock bushing to pre-
vent it from rotating.
2 When the screws have
been loosened sufficient-
L y to permit the bushings
to get raised 5
-
6 mm,
the aluminium panel of
the dust cover may be
brought in below the
heads of the two lock
bushings.
3
Retighten the screws.
You may find it neces-
sary first to close the
cover and bring it into
position before finally
tightenning the screws.
The record turntable is placed
on the lower turntable with
the black ribs facing up-
wards.
Pickup
Remove the transit protection
device, inserted between Ihe
two arms.
Insert the pickup cartridge in
the pickup arm.
Remove the stylus guard.
Stylus Force Adjuslmenl
Recommended stylus force
for the MMC 4000 is
1
gram.
The adjusting device (13) al-
lows adjustment of stylus
force between 0 and 1.5 gram.
Use the screwdriverwhich is
provided, reading thevalue
on the small scale.
9
Hide quick links:
Advertisement
Table of Contents
