Setting Up; Assembly After Transport; Ac Connection - Bang & Olufsen Beogram 4002 Manual

SETTING UP
Assembly after Transport
Your Beogram 4002 is pro-
tected in several waysagainst
damage i n transit.
It is important that your Beo-
gram is correctly assem bled
and set up after it is unpac-
ked. I f you wish, you may
leave this dealer.
The following components
are enclosed in the foam in-
serts in thecarton:
1 Dust cover
2 Turntable
3 Pick-up
4 Adapter
The pickup carton contains
the following items:
Pickup cartridge with sty-
lus guard
Screwdriver for stylus
force adjustment
Cleaning brush for pickup
stylus
Balance for checking sty-
lus force.
NOTE: Keep the original
packing and this instruction
for use at a later transport.
Unnecessary damage may be
done to the record player if is
sent without being correctly
securedandpacked.
Turn three lock screws in the
bottom of the turntable unit
anti-clockwise against the
stop (towards PLAY).
AC Connection
Your Beogram 4002 will ope-
rate on 117 Volts AC only
at line frequencies of both 50
and 60 Hz without switching
of any kind.