Mio Moov DR03 User Manual page 19

Getting Started-Operating
B. Manual Recording Mode (Force recording before the GPS has completed
positioning)
1) First insert the formatted memory card, then press the power/function button; the
indicator will light up sequentially and the device will complete start up in approximately
1 second.
2) Then, the GPS indicator will flash continually with 0.5 second intervals, at this time it
has not yet entered recording status. Press the power/function button again, the
buzzer will "beep" twice and the recording indicator will light up and flash continually
with 1 second intervals, this is when the recording starts; the GPS indicator will first
flash with 0.5 second intervals before the GPS positioning is complete, and when GPS
positioning is successful, the indicator will flash with 3 second intervals.
second intervals.
18