Source Connections - Electrohome VistaPro 2000 User Manual

Table of Contents

Advertisement

INSTALLATION & SETUP
2.4
Source
Connections
2-8
VistaPro 2000 User's Manual
The table or cart should be reasonably level. Fine adjustments to the projector
level can be made by adjusting the height of the projector legs; refer to 2.7,
Leveling for details.
If the projector is to be inverted, a ceiling mount fixture is required. Electrohome
provides a ceiling mount kit for assembly and installation by a dealer/installer.
For more information, contact your dealer or Electrohome.

In rear screen applications where space behind
the projector is limited, a mirror may be used to
fold the optical path. See Figure 2.7. The
position of the projector and mirror must be
accurately set. If considering this type of
installation, call your dealer for assistance.
The rear panel of the projector has two standard input panels to which you may
connect a variety of sources. The upper right panel (DAT 1) accepts an RGB
input from an external RGB source with audio follow-through. The lower left
panel (if video decoder module is installed) accepts composite video (VID 1) or
S-video (VID 2) and audio from devices such as video tape or disk players.
There are also several optional interfaces available for connecting other sources
(DAT 2). Such an option installs in the upper left panel. See Figure 2.8.

The RGB input (DAT 1) includes BNC type connectors for connection to a
variety of RGB sources. Such sources include VGA, SVGA, Mac, PowerMac,
DEC, Sun, SGI and others. VistaPro 2000 supports multiple sync types: sync-on-
green for data, composite, and separate H & V.
NOTES: 1) Depending on the source, you may need a custom adapter cable that
has BNC connectors at the projector end and different type of connector at the
other (such as a 15-pin "D" connector for computer sources). Contact your
dealer or Electrohome 2) If you connect a computer directly to DAT 1 you may
experience locking problems due to the different impedance sync output of the
VistaPro 2000
Figure 2.8.
Figure 2.7. Folded Optics
Back Panel

Advertisement

Table of Contents
loading

Table of Contents