Automatic Thermostat; Fan/Cool Selector - West Marine Carry-On 12025763 Installation, Operation And Warranty

Operation
1. Plug in the Carry-On.
2. Set the thermostat to its coldest setting (fully clockwise).
3. Set the FAN/COOL selector to HI COOL.
4. Close all windows, vents, hatches, doors, and exhaust
fans in the area to be cooled by your Carry-On.
5. Once your cabin or boat has cooled, adjust the thermostat
and fan speed to suit your comfort level.
THERMOSTAT
Figure 7. The Carry-On Control Panel
Operational Features

Automatic Thermostat

When either HIGH or LOW COOL MODE is selected, the
thermostat automatically turns the compressor on and off
in response to the cabin temperature. The fan will run
continuously, circulating air in your boat.
You may find it desirable, once the cabin is comfortable,
particularly after sundown, to adjust the thermostat away
from the coolest setting before retiring.
After some experience, you will know the optimum setting
for your ideal sleeping conditions.
Carry-On Portable Cabin Air Conditioner
FAN
OFF
HI FAN HI COOL
LO FAN LO COOL
9

FAN/COOL Selector

The FAN/COOL selector control allows a choice of either
cooling cabin air on HI COOL/LOW COOL, or circulating
cabin air at existing temperature on HI FAN/LOW FAN. The
HIGH/LOW settings in either FAN or COOL determines the
air speed only.
Note: The Carry-On will dehumidify your cabin. As the
humidity level drops, the cool air from the Carry-On will
increase.
• English