Advertisement

Product features and decorations may vary from picture above.
Instructions
Model Number: H5124
WARNING
IMPORTANT! KEEP FOR FUTURE REFERENCE.
Please read these instructions before assembly and use of this product.
Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included).
Requires one LR20 ("D") alkaline battery (not included) for operation.
www.fisher-price.com
1
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H5124 and is the answer not in the manual?

Questions and answers

Summary of Contents for Fisher-Price H5124

  • Page 1 Product features and decorations may vary from picture above. Instructions Model Number: H5124 WARNING IMPORTANT! KEEP FOR FUTURE REFERENCE. Please read these instructions before assembly and use of this product. Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included).
  • Page 2 Note: Tighten or loosen all screws with a Phillips screwdriver. Do not over-tighten. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A. ® and ™ designate U.S. trademarks of Mattel, Inc. ©2004 Mattel, Inc. All Rights Reserved.
  • Page 3 Assembly IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never M5 x 20 mm Screw - 2 substitute parts.
  • Page 4 Assembly Seat Back Tube Pad Seat Back Pocket Square Openings Pad Bottom Pocket • Position the seat back tube so that the square openings are upright. • Fit the seat back tube onto the ends of the base wire. • Push the seat back tube to be sure it is completely on the base wires.
  • Page 5 Assembly Handles Toys Toy Bar Straps • Fit the handles through the side openings in the pad. Toys Toy Bar Plugs • Fit the toy bar straps through the toy rings and fasten the strap. Assembly is now complete. Sockets •...
  • Page 6: Battery Installation

    Battery Installation Hint: We recommend using an alkaline battery Battery Compartment for longer battery life. 1,5V LR20 (“D”) Shown Actual Size • Insert a coin into the battery compartment door and pry the battery compartment door off. • Insert one LR20 (“D”) alkaline battery into the battery compartment.
  • Page 7: Setup And Use

    Setup and Use WARNING To prevent serious injury or death: • It is dangerous to use this reclined cradle on an elevated surface, since child's movement may cause product to slide or tip over. • Never use on a soft surface (bed, sofa, cushion), since product can tip over and cause suffocation in soft surfaces.
  • Page 8: Consumer Information

    Soothing Unit Care • The pad and blanket are machine washable. Wash them separately in cold water on the gentle cycle. Do not use bleach. Line dry only. • The frame and toys may be wiped clean using a mild cleaning solution and a damp cloth.

Table of Contents