Download Print this page

Advertisement

Quick Links

HHB63
OWNER'S MANUAL

Advertisement

loading
Need help?

Need help?

Do you have a question about the HHB63 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Fisher-Price HHB63

  • Page 1 HHB63 OWNER’S MANUAL...
  • Page 2: Before You Begin

    BEFORE YOU BEGIN IMPORTANT! Keep this instruction sheet for future reference, as it contains important information. Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. Do not use the product if any parts are missing, damaged or broken. Do not use accessories or replacement parts other than those approved by the manufacturer.
  • Page 3 WARNING FALL HAZARD: Children have suffered head injuries falling from rockers. • ALWAYS use restraints until child is able to climb in and out of the product unassisted. Adjust to fit snugly. • NEVER lift or carry child in rocker. •...
  • Page 4 PARTS IMPORTANT! Please remove all parts from the package and identify them before assembly. Some parts may be packed in the pad. NOTE: Tighten or loosen all screws with a Phillips screwdriver. Do not over-tighten the screws. M4,5 x 25 mm Screw M5 x 30,5 mm Screw...
  • Page 5 ASSEMBLY Turn the assembly around and fit it to the other side rail.
  • Page 6 ASSEMBLY Turn the assembly around and fit the ends of the crossbar to the pegs on the side rails.
  • Page 7 ASSEMBLY Turn the assembly face down to fit the kickstand to the side rails. Turn the assembly upright. After assembling the seat back tube, pull up on it to be sure it’s secure!
  • Page 8 ASSEMBLY...
  • Page 9 ASSEMBLY After assembling the pad, push down in the seat area to be sure it’s secure to the frame! The toy bar is removable. Simply press the ends of the latches and lift the toy bar.
  • Page 10: Battery Installation

    BATTERY INSTALLATION The battery compartment is located on the inside of one of the side rails. Loosen the screw in the battery compartment door and lift to remove the door. Insert one D (LR20) alkaline battery. Replace the battery compartment door and tighten the screw.
  • Page 11 SEAT BACK POSITION Press both buttons and Upright lift for upright or lower for recline. Recline KICKSTAND Rotate the kickstand in for rocker or out for infant seat. Rocker Infant Seat...
  • Page 12: Restraint System

    RESTRAINT SYSTEM Position the restraint pad between your child’s legs and fasten the restraint belts to each side of the restraint pad. Make sure you hear a “click” on both sides. Check to be sure the restraint system is securely attached by pulling it away from your child.
  • Page 13 CALMING VIBRATIONS Slide switch to turn vibrations ON or OFF. Low battery power or a static charge may cause this product to operate erratically. If vibration does not turn on or will not turn off, remove and reinstall the battery. If you still experience a problem, replace the battery.
  • Page 14 TODDLER ROCKER Fit the restraint system back through the slots in the pad when your child is ready to use as a toddler rocker.
  • Page 15: Battery Safety Information

    CARE The pad is machine washable. Wash the pad separately, with a mild detergent, in cold water and on the gentle cycle. Do not use bleach. Tumble dry separately on low heat and remove promptly. To remove the pad: Lift to remove the pad pegs from the frame. Unfasten the rear strap buckle on the pad and remove the pad.
  • Page 16 AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312. NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland. ©2021 Mattel. HHB63-ZC70 PRINTED IN CHINA 1102727988-AA2...