321037
4
INSTALLATION INSTRUCTIONS
4.1
Air Space Requirements
On all refrigerators and freezers it is important that an air gap is left around the product:
•
50mm (2") clearance at the top.
•
20mm (0.8") clearance each side.
•
30mm (1.2") clearance at the back.
4.2
Levelling Components
Front and rear rollers are fitted ex factory.
Cabinet levelling can be done by adjustment of the front roller-levelling screw. See diagram 4.2.
Weight should be lifted off the cabinet for ease of adjustment.
If it is necessary to place packing material under the rollers to achieve the required height, use only
hardboard or plastic, NOT metal.
Diagram 4.1 (Front Leveller & Roller)
Diagram 4.2 (Front Levelling Screws)
10