Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sytech SY-4096
Summary of Contents for Sytech SY-4096
-
Page 2: Important Safety Instructions
Welcome 10.Unplug the power from the outlet when the unit is not in use. Thank you for purchasing the Dual Screen DVD Player SY-4096. In order to fully benefit from this product, please follow the 11.Attention should be drawn to the environmental aspects of instructions in this user manual very carefully. -
Page 3: Safety Precautions
Safety Precautions WARNING Notes on Copyrights: RISK OF ELECTRIC SHOCK DO NOT OPEN 10. It is forbidden by law to copy, broadcast, show,broadcast via cable, play in public, or rent copyrighted material without 1.Warning: This digital video disc player employs a laser system. permission. -
Page 4: Troubleshooting
Package Troubleshooting Remote control with battery PROBLEM SOLUTION AC adaptor Make sure the machine is connected properly. No sound or Make sure all cables are securely inserted into distorted sound the appropriate jacks. Car charger You can't advance through the opening credits AV connector Can't advance and warning information that appears at the... - Page 5 Identification of Controls Main Unit 1.SD/MS/MMC 12. UP/DOWN MASTER TFT SCREEN 2. POWER ON/OFF 13. MODE 3. HEADPHONE OUT JACKS Slaver TFT menu setting. 4. VIDEO/AUDIO OUT 14. LEFT/RIGHT 5. DIGITAL AUDIO OUT (COAXIAL) 15.BACK LIGHT 6.USB Slaver TFT backlight switch. 7.
-
Page 6: Powering And Installation
Powering and installation Connecting to monitor The unit can also be connected to an external LCD monitor. Plug one end of the AC/DC power adaptor into the DC IN 9-12V jack Connect the unit to the power outlet through the AC/DC adaptor or the on the right of theunit, then plug the other end into the AC power 12V car adaptor.Then connect the unit DC OUT jack to DC IN 9-12V socket. -
Page 7: Connecting With External Speaker
Connecting to TV Connecting with external Speaker The unit can be connected with an external speaker.Please see the You can also connect the unit to the TV to enjoy high quality picture and following illustration. stereo sound.Please refer to the following illustration: AV OUT COAXIAL DC OUT... -
Page 8: The Use Of Remote Control
The Use of Remote Control Please put the battery into the remote control as shown below in the illustration. VOL- VOL+ ENTER SOURCE CR2025 CR2025 When using the remote control, make sure the infrared window is STEP MUTE SOURCE pointed to the infrared recieving window of the unit. The distance between the unit and the remote control should be within 3 metres. - Page 9 Identification of Controls Remote control unit 5.10+ BUTTON In order to select a track 10 or greater, first press 10+, For example; select track 12, first press 10+, and then press number 2 button. STEP MUTE SOURCE 6. MENU/PBC Return to DVD root menu(DVD). PBC on/off switch (VCD) .
- Page 10 Identification of Controls Remote control unit BUTTON 25.SLOW Press BUTTON allow skipping back at 5-level speed(X2->X4-> Press Slow button repeatedly to enter slow playback, and cycle X8->X16->X32 -> PLAY), press PLAY button return to normal playback. between different speeds. The speeds are 1/2,1/4,1/8,1/16,and normal.
-
Page 11: Audio Setup Page
SETUP Menu Setting General Setup Page Angle Mark Displays current angle setting information on the right hand corner Press SETUP button to get the setup menu. Use direction buttons of the TFT screen if available on the disc. to select the preferred item. After finishing settings, press SETUP again to normal display. -
Page 12: Video Setup Page
Video Setup Page SETUP Menu Setting Audio Setup Page Video Setup Page Downmix This options allows you to set the stereo analog output of your - - VIDEO SETUP PAGE - - DVD Player. BRIGHTNESS LT/RT :Select this option if your DVD Player is connected to a CONTRAST Dolby Pro Logic decoder. -
Page 13: Password Setup Page
SETUP Menu Setting Password Setup Page Preference Page Password: select the menu password change page. PAL - Select this if the connected TV is PAL system.It change will video signal of a NTSC disc and output in PAL format. NTSC-Select this if the connected TV is NTSC system.It will change the video signal of a PAL disc and output in NTSC format. - Page 14 SLAVER TFT MENU SETTING What can be seen when plugging a USB or a SD. PICTURE Page PICTURE BRIGHT CONTRAST COLOR MEDIA LANG ENGLISH Z00M 16:9 RESET Press the "SOURCE" button on the units main panel or reomote control,select MEDIA and the units would auto detect the USB /CARD socket,then press ENTER to enter USB/CRAD mode.
-
Page 15: Electronical Parameters
Parameters and specifications Electronical parameters Battery Parameters Item Standard requirement Power requirements : AC 100-240 V , 50/60 Hz Battery Specifications： Output：7.4V Power consumption : <15W Operating humidity : 5 % to 90 % Storage and work circumstances： 1. Storage circumstances Temperature Humidity VIDEO OUT 6 months... -
Page 16: Specifications
Specifications Digital 9” TFT LCD display (800x480) Compatible formats: DVD, DVD+R/RW, DVD-R/RW, SVCD, VCD, CD, CD-R/RW,MP3, WMA, JPEG, Kodak Picture. Compatible with MPEG-4 videos 2.0 USB port SD/MMC/MS card reader Compatible with TV system: PAL / NTSC Rechargeable battery integrated in main DVD unit of 1200 mAh 2 brackets included for an easy installation on the car seats Connections: Audio &...
Need help?
Do you have a question about the SY-4096 and is the answer not in the manual?
Questions and answers