TV. 6. Your RC-7-1 is now programmed to operate your TV. Write down your TV code on the label at the back of the RC-7-1 for future reference. 7. To program other equipment, repeat the Steps 1-6 for your DVD, SAT, AUDIO and or your second TV or DVD.
4. If the TV turns off. This indicates that the RC-7-1 is now set • PR to your TV. This 5. Press any key to exit and the red LED will go out automati- cally. The RC-7-1 is now ready to operate your TV.
• PREPROGRAMMED CODE DISPLAY This method displays its 4-digit preprogrammed codes that will mati- operate your equipment. You can control the display of each position in an easy way. For example, press for 1st digit of code, press key for 2nd digit of code, press key for 3rd digit of code and press key for 4th digit of code.