How To Vacuum Seal With Seal-A-Meal Accessories - Seal-a-Meal VS230 Reference Manual

HOW TO VACUUM SEAL WITH SEAL-A-MEAL
1. Attach one end of the Accessory Hose into the Accessory Port.
2. Attach the other end of the Accessory Hose to the Accessory.
3. To begin the vacuum process, press down firmly on Lid with both hands and hold until the
motor starts. Continue to hold the Lid. When the Hands-free Indicator Light illuminates, it is
safe to remove hands from the Lid. The unit continues to vacuum. Once all of the air is
removed, the motor and indicator lights will automatically turn off.
NOTE: Sealer will not operate if Lid is not properly closed.
NOTE: The Open/Cancel button can also be used to cancel the process mid-cycle and open the Lid.
ACCESSORIES
-E8-
TM