How To Make Custom Sized Bags With The Integrated Bag Roll - Seal-a-Meal VS230 Reference Manual

HOW TO MAKE CUSTOM SIZED BAGS WITH THE
1. Open Lid and place bag roll into roll storage compartment.
2. Lift up Bag Cutter Bar.
3. Pull enough bag material from roll to hold item to be vacuum packaged, plus 3 inches. Lower
the Bag Cutter Bar.
4. Cut desired bag length from Bag Roll. Make sure to cut a straight line. Plug in Power Cord.
5. Open the Lid. Place one end of the cut bag between the Sealing Strip and the Lower Sealing
Gasket. DO NOT place open end of bag in the Drip Tray.
6. Close Lid. Position hands on both sides of the Lid. Press firmly on both sides of the Lid and hold
until the motor starts.
NOTE: Sealer will not operate if Lid is not properly closed.
INTEGRATED BAG ROLL
-E5-