BMB R 1200 RT Rider's Manual page 122

of wheel size on the ABS and
8
ASC systems at the start of this
chapter.
120
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Slip the spacing bushing into
the left-hand side of the wheel
z
hub.
The front wheel must be
installed right way round to
rotate in the correct direction.
Note the direction-of-rotation ar-
rows on the tyre or the wheel
rim.
Roll the front wheel into posi-
tion between the front forks.
Raise the front wheel, insert
quick-release axle 2 and tight-
en to specified torque.
Quick-release axle in axle
holder
50 Nm
Tighten axle clamping screw 1
to the specified torque.
Quick-release axle clamp
screws
19 Nm
Remove the front-wheel stand.
Ease the brake calipers on to
the brake discs.
Insert the ABS sensor into its
bore.
Work retaining clip 3 with the
ABS cable into position on the
fork tube.
Seat the ABS cable in retaining
clip 4.
Install screw 2 of the ABS
sensor.