Special Programmes; Temperature Selection; Spin Speed Selection - Beko WMB 51232 PT Instruction Manual

• Daily express
Use this programme to wash your lightly
soiled cotton clothes in a short time.
• Darkcare
Use this programme to wash your dark
coloured laundry or the laundry that you
do not want it get faded. Washing is
performed with little mechanic action and
at low temperatures. It is recommended to
use liquid detergent or woolen shampoo for
dark coloured laundry.
• Mix40
Use this programme to wash your cotton
and synthetic clothes together without
sorting them.

Special programmes

For specific applications, select any of the
following programmes.
• Rinse
Use this programme when you want to
rinse or starch separately.
• Spin + Drain
Use this programme to apply an additional
spin cycle for your laundry or to drain the
water in the machine.
Before selecting this programme, select
the desired spin speed and press Start /
Pause button. First, the machine will drain
the water inside of it. Then, it will spin the
laundry with the set spin speed and drain
the water coming out of them.
If you wish to drain only the water
without spinning your laundry, select the
Pump+Spin programme and then select
the No Spin function with the help of Spin
Speed Adjustment button. Press Start /
Pause button.
C
Use a lower spin speed for delicate
laundries.

Temperature selection

Whenever a new programme is selected,
the maximum temperature for the selected
programme appears on the temperature
indicator.
To decrease the temperature, press
the Temperature Adjustment button.
Temperature will decrease gradually.
C
If the programme has not reached
the heating step, you can change the
temperature without switching the
machine to Pause mode.

Spin speed selection

Whenever a new programme is selected,
the recommended spin speed of the
selected programme is displayed on the
spin speed indicator.
To decrease the spin speed, press the Spin
Speed Adjustment button. Spin speed
decreases gradually. Then, depending on
the model of the product, "Rinse Hold" and
"No Spin" options appear on the display.
See "Auxiliary function selection" section for
explanations of these options.
C
If the programme has not reached the
spinning step, you can change the
speed without switching the machine
to Pause mode.
50
EN