Table of Contents
Advertisement
MPH6935_OM Eng
3/12/02
Caller ID Features
Viewing the Caller ID message list
The Caller ID list stores information for up to 30 incoming calls - even
unanswered calls.
1
Press
CID/MENU
When there are new messages you have
received, "
displayed. The summary screen shows how
many new calls are stored, along with the total
of new and old calls stored in the list.
2
Press M to display the latest Caller ID message.
3
Press M to see the next message. Or press L
to see the previous message.
4
Press
OFF
Long Distance Calls and Area Code Setting/Cancellation
Pressing
while the incoming call information is
1
displayed (in step 1) will set or cancel a long distance
call. The prefix "
of the phone number when a long distance call is set.
Pressing
again will cancel the long distance call setting.
1
Pressing
will set or cancel an area code setting.
3
Notes
• If a call comes in via a telephone system that does not offer Caller ID service, no
information is stored.
• Each message can be up to 15 characters for the phone number and the name.
• If the phone number is more than 15 characters, only " " will be displayed at the
beginning of the phone number when a long distance call is set.
• In Caller ID operation, if no key is pressed for more than 30 seconds, an error tone
sounds and the telephone returns to the standby mode.
• The number of calls from the same Caller ID appears next to the received time.
Once you read the new message, the number will disappear.
28
3:07 PM
Page 28
(continued)
. The summary screen appears.
" and the number of calls are
to return to standby.
" will be displayed at the beginning
Advertisement
Table of Contents
