Setting The Message Waiting - Memorex MPH2410 Operating Instructions Manual

MPH2410.O/M.QXD 3/7/03

SETTING THE MESSAGE WAITING

The unit's Message Waiting setting is set to OFF by default. Message Waiting will
turn on automatically only when your local phone company sends the signal provided
that this optional service is available in your area. When all messages have been
received, the local telephone company will send a signal to turn the Message Waiting
off. In the unlikely event the Message Waiting On signal fails to turn off due to a data
capturing error, simply turn it off while in the Standby mode as follows:
1
Press and hold the VOICE MAIL/
MENU button for more than two
seconds; the Ringer Volume setting
will appear in the display.
3
Press the EDIT/FLASH button to reset
the Message Waiting indication; "DEL"
will appear.
5
9:35 AM Page 19
SET-UP INSTRUCTIONS (CONTINUED)
2
1
Press the Scroll Down button
times or the 0 key button
Message Waiting setting ("MSG
WAITING") will appear.
4
Press and hold the SAVE/RE/PA
button for more than two seconds; a
long beep will be heard to confirm the
setting has been saved.
You can continue with programming or
press the VOICE MAIL/MENU button
to return to the Standby mode.
19
2
nine
; the