Related Manuals for unication UNI MAX
Summary of Contents for unication UNI MAX
- Page 1 Tone Alert and Ring Tone Amplifier...
- Page 2 Alpha Gold, Alpha Elite and Alpha Gold Plus Numeric, Two-way messaging NP88, M90 ReFlex Other applications: Category Model Cell phones The UNI MAX device is compatible with most cellular phones. Non Unication Pagers The UNI MAX device is compatible with most pagers.
-
Page 3: Package Content
Thank you for purchasing Unication’s product, UNI MAX. UNI MAX will always remind you that your pager has been paged. Its high volume audible alert will always catch your attention. We sincerely hope you enjoy its capabilities. This manual can be downloaded from Unication official website: http://www.unication.com... -
Page 4: General Information
1. Operation with your Unication Pager: For best operation, select the correct dock adapter if needed and settle in place to match your Unication pager. Then simply set the pager into UNI MAX as shown in the illustrations below. - Page 5 2. Operation with your Cell Phone: Your Uni Max is also designed to work with most of the popular brands of cellular phones. Please turn the cell phone to any audible alert mode and then place into the UNI Max.
- Page 6 Or you can install the standard AA alkaline batteries only. The UNI MAX will operate normally from the wall transformer, but if the main power is interrupted, the UNI MAX will automatically switch over to the rechargeable batteries.
- Page 7 1. Connecting to the Wall Transformer Connect the power cable to the UNI MAX and then plug the AC transformer into the electrical socket (90-240VAC). When the UNI MAX is powered, the GREEN power LED will illuminate. 2. Installing the Rechargeable Battery Pack You can select to use rechargeable battery pack as the main power source.
- Page 8 Step1: Remove the retaining screw in the battery door and then lift off the battery compartment cover. Step2: Then simply insert the pin connector from Battery Pack into the mating connector inside the battery compartment of the UNI MAX unit. Socket Step3: Reinstall the battery cover and the fastener, and then you can reinstall the wall transformer if needed.
- Page 9 Step2: Observing the correct polarities, and please insert the normal batteries into the UNI MAX battery compartment accordingly. Step3: Reinstall the battery cover and the fastener. After the batteries are inserted, the GREEN Power LED will automatically light and flash.
- Page 10 Tone Alert and Ring Tone Amplifier 3. LED Indicator LED indicator will help you to identify the status of UNI MAX. Action With wall transformer Meaning Green The main power status is normal. Orange Rechargeable batteries are low and charging.
-
Page 11: Operation
Operation 1. Alert Tone Selection press There are ten alert tone types to choose from. Follow the directions below to sample and then to select your favorite alert. (1) Listening to current tone alert setting: Depress then release the Alert Tone Setting Button to listen to the current alert type. (2) Listen to the next alert tones type: Depress then release the alert selector switch again and the next alert type will sound. - Page 12 Press and turn the volume knob to set an appropriate maximum level for the alert volume. When an alert has been detected the UNI MAX will begin the alert cycle at a low volume level then increasing the alert level over the time period you have selected.
- Page 13 3. Alert Time Setting The UNI MAX will alert audibly and visually when an alert has been detected. You can select the time duration of the UNI MAX alert by adjusting the alert time setting switch. The selections are mute (no audible alert), one minute, three minutes or a continuous alert. Use the selection switch as pictured below to make the selection.
- Page 14 Tone Alert and Ring Tone Amplifier 4. Reminder After a detected alert, to remind you of the detected alert, the Reset button will keep flashing until it is depressed. 5. Terminating the Alert Cycle The alert stops automatically when the selected alert time has expired excluding the continuous mode.
-
Page 15: Specification
Specification General Specification Alert Tone SPL : Max. >100 dBspl @ 30 cm: Min. > 70 dBspl @ 30 cm (Volume control on minimum) Standby Power Consumption : < 15 mW Max. Vol. Power Consumption : 1.5 Watt Operating Temperature : 0 deg C ~ +50 deg C Storage Temperature : -20 deg C ~ +85 deg C Powered by Standard Battery : AA Alkaline Battery x 3 Powered by Rechargeable Bat. - Page 16 Unication Group Unication USA Inc, 1901 E. Lamar Blvd., Arlington, Texas, 76006,USA. Tel : 817-303-9320 Fax : 817-886-3424 E-mail : salesenquiry@uni.com.tw E-mail : sales@unication.com http://www.unication.com http://www.uni.com.tw Patent Pending...