How Do I Put It In My Car; Attaching The Windshield Mount - Uniden iGO CAM 755 Owner's Manual

How Do I Put It in My Car?

Attaching the Windshield Mount

1. Slide the bracket hook into the bracket slot provided on the top of the unit.
2. After inserting the hook, push it down till it locks in position.
3. Press the suction cup flat against the windshield and rotate the suction lock
clockwise to secure the unit in place.
4. Gently pull on the mount to make sure it is secure.
5. To remove the unit (including the windshield mount), rotate the suction lock
anti-clockwise and gently pull out the suction cup. To detach the unit from
the windshield mount pull the lever up and gently pull the unit out.
It maybe a good idea to secure the power cord with cable clips so that it does
not interfere while driving.
Avoid rotating the unit at 360° as it might damage the cabling inside.
Suction cups will not stick well on a curved/textured or wet surfaces.
NOTE
UNIDEN iGO CAM 755
7
Vehicle Recorder