Table of Contents
Advertisement
HoW tHE XL-20 ACtiVitY Monitor SYStEM WorKS
The XL-20 Activity Monitor contains a low-power wireless radio transceiver
and an accelerometer. Unlike traditional pedometers, the XL-20 must be
worn on footwear and not on a belt or bag. The XL-20 collects activity data
for steps, activity time, calories burned, and distance traveled. It categorizes
activity data for qualified steps as either a run or a walk. Depending on a
user's daily activity levels, the XL-20 will store approximately 10 to 30 days
of activity.
Your XL-20 sends your activity information automatically to the ActiLink
USB Transceiver when it is plugged into your computer and the power is on.
Data is offloaded when the Activity Monitor comes in close proximity (about
30 to 60 feet) with a live ActiLink USB Transceiver. The XL-20 Activity
Monitor attempts to find an ActiLink approximately every 10 minutes when
you are active and every 60 minutes when it is asleep when you are not active.
The XL-20 will go into a sleep state when not active to conserve battery
power; to activate the XL-20 (wake it up from sleep mode), just start walking
or tap your foot a few times.
E-4
LifeSource Health Line (toll-free): 1-888-726-9966
Advertisement
Table of Contents
