Table of Contents
Advertisement
GEttinG StArtED
Follow these instructions to get started using your new wireless XL-20 Activity Monitor. (Note:
if you already use another Wellness Connected family device, please skip Step 1 and simply add
your new XL-20 device in the Devices tab of your Wellness Connected software in the account
section or ActiHealth account.)
Step 1: Setting up Wellness Connected on your personal computer
(a)
Go to the following Internet web address:
http://www.LifeSourceOnline.com/getstarted
(b)
Download the Wellness Connected Tracking Software and follow the instructions to
install the software.
(c)
Run the software and complete the walkthrough set-up and registration process.
iMportAnt notE
Software is compatible with the following PC operating systems: Mac OSX Tiger (10.4),
Leopard (10.5), Windows 2000 SP4, Windows XP SP2, Vista Home Premium, Ultimate
Step 2: Wearing your XL-20 Activity Monitor
(a)
Identify a good location on your footwear to mount your ActiPed: shoelaces, shoe
tongue or shoe strap.
(b)
Orient the XL-20 on your footwear so it will be as level with the ground as possible.
Make sure the open end of the clip is pointing towards your toes (see figure on page 1).
(c )
Securely clip the XL-20 so that it is snug to the shoe and will not move or flop around
when walking, jogging or running.
iMportAnt notE
maintain its accuracy. The XL-20 CANNOT be mounted on belts, handbags, watches,
headwear or other locations other than your footwear.
Congratulations! Set-up is complete and now, it's time to get moving! Use the Wellness Connected
software to track your progress over time, review your past performance, and set goals to push yourself.
E-2
– Computer System Requirements: The Wellness Connected Tracking
– The XL-20 MUST be attached to footwear properly or it will not
LifeSource Health Line (toll-free): 1-888-726-9966
Advertisement
Table of Contents
