Download Print this page

August Smart Lock Installation Manual page 20

Hide thumbs Also See for Smart Lock:

Advertisement

Step 5:
Position adapter and
align mounting plate.
Remove the tape from the key hole, and use your
A
key to turn your deadbolt to the fully unlocked position.
B
If your lock was not in the Compatibility Chart, select
the adapter that fits your tail piece. To do this, slide each
adapter onto the tail piece. The correct adapter will
have the small nub pointing up.
Place the correct adapter onto the tail piece with
C
the small nub pointing up. Tighten the screws until they
are just tight. Do not over-tighten. Over-tightening
can deform the mounting plate and interfere with the
operation of the lock.
Installation Guide
20

Advertisement

loading

This manual is also suitable for:

Smart lock homekit edition