Hooking Up The Unit - LG HT904TA Owner's Manual

HT904PA-AHP_BCANLL_ENG_0739

Hooking up the unit

a Connect jacks on the unit and your TV (DVD player or Digital Device etc.) using the cables.
Check the jacks of your TV, and choose the A, B or C connection. Picture quality improves in order from A to C.
Audio In connection
The unit's Audio jacks are colour
coded (red for right audio and white
for left audio). If your TV has only
one output for audio (mono),
connect it to the left (white) audio
jack on the unit.
AM/ FM connection
AM - Connect the AM loop
aerial to the DVD receiver.
FM - Connect the FM aerial.
The reception will be its best
when the two loose ends of
the aerial are in a straight and
horizontal line.
b Plug the power cord into the power source.
3/20/09 4:41 PM Page 7
B
Component Video connection ( )
Connect the COMPONENT
VIDEO (PROGRESSIVE
SCAN) OUTPUT jacks on
the unit to the corresponding
input jacks on your TV using
a Y PB PR cable.
A
Video Out connection ( )
Connect the VIDEO
OUTPUT(MONITOR) jack
on the unit to the
corresponding input jack on
your TV using a Video
cable.
7