Changing The "Setup" Setting - Sony Wega KV-HP212 Operating Instructions Manual

x

Changing the "Setup" setting

The "Setup" menu allows you to adjust settings below.
1
Press WEGA GATE and select "Settings".
2
Press V or v to select the "Setup" icon (
3
Press V or v to select the desired item (e.g., "Language"), then press
Select
"Language"
"Video Label"
"Color System"
"Wake Up Timer
Beep"
"Factory Settings"
Notes
• Color system is not selectable in FM Radio mode.
• To ensure the beeping sound can be heard, you must set an appropriate volume level on your
TV and make sure the TV is not in mute condition.
• To stop the beeping sound, press any buttons on the remote control or top control panel.
• If no button is pressed for three minutes, the beeping sound will automatically go off.
To
change the menu language.
Press V or v to select either "English" or "
press .
label the connected equipment.
(1) Select "Video Input" and press
input you want to label, then press
(2) Select "Label" and press
the label options: "Video 1"/"Video 2"/"DVD", "VCR",
"SAT", "Game" or "Edit"*.
* You may edit the video label to your favorite name. Press V or
v to select alphanumeric characters for the label, then press
select the color system.
Press V or v to select either "Auto", "PAL", "SECAM",
"NTSC3.58" or "NTSC4.43", then press
"Auto".
allow your TV to emit beeping sound when TV switches on
automatically using wake up timer.
Press V or v to select "On", then press
To cancel, select "Off", then press
reset your TV to factory settings.
Press and press V or v to select "Yes", then press
To cancel, select "No", then press
), then press .
" (Chinese), then
. Press V or v to select the
.
, then press V or v to select
. Normally, set this to
.
.
.
.
.
.
19