Samsung SDP-960 User Manual page 18

installation & connection
❖ To connect to a PC that will be used as output device
Use the USB cable to connect between PC and digital presenter. You can view the video from the digital
presenter on the PC monitor.
Connect the cable to the USB
port of the PC.
J 
It is recommended to connect the USB cable to the USB port on the main board of your PC.
(Using an extension front port or the bus-power USB hub may cause a problem, depending on the manufacturer.)
Use only the USB cable of less than 4.0m in length.
Connect the cable to the RS-
232C port of the PC.
J 
The RS-232C cable is optional that is not included in the product package. Purchase it if needed.
However, a third-party RS-232C cable (manufactured by other than Samsung Techwin) may not guarantee a
proper operation.
M

If using the USB cable for the connection, install the provided USB driver and SDP-960 Viewer on your PC.
For more information, refer to the provided program manual.
If using the RS-232C cable, no specific driver is provided. Obtain the necessary programs on your own.
18_
installation & connection
DVI VGA OUT
C-VIDEO
Digital Presenter
RS-232C
RS-232C
Digital Presenter
USB
VGA IN 1 VGA IN 2 USB DC 12V OUT
0.6A
DC 12V IN