Table of Contents
Advertisement
General information
About the workshop manual
This workshop manual contains technical specifica-
tion, descriptions and instructions for repairing
the standard versions of the following drives
AQ250A, B, C, D. The product designation and
number should be given in all correspondence about
the product.
This Workshop Manual has been developed primarily
for Volvo Penta service workshops and qualified per-
sonnel. Persons using this book are assumed to have
a grounding in marine drive systems and be able to
carry out related mechanical and electrical work.
Volvo Penta is continuously developing their prod-
ucts. We therefore reserve the right to make
changes. All the information contained in this book
is based on product data available at the time of
going to print. Any essential changes or modifi
cations introduced into production or updated or
revised service methods introduced after the date
of publication will be provided in the form of Service
Bulletins.
Replacement parts
Replacement parts for electrical and fuel systems
are subject to statutory requirements (US Coast
Guard Safety Regulations for example). Volvo Pen-
ta Genuine parts meet these requirements. Any
type of damage which results from the use of non-
original Volvo Penta replacement parts for the prod-
uct will not be covered under any warranty provided
by Volvo Penta.
5
Hide quick links:
Advertisement
Table of Contents
