Table of Contents
Advertisement
4.5 Installing the Temperature Sensor
Fig. 4.5
• To minimize floor height, chisel a 10 mm X 10 mm X 250 mm (
channel in the subfloor to receive the temperature sensor.
The sensor must be embedded in cement or an equivalent binder (cement glue,
ceramic glue, self-levelling cement).
• Glue the sensor to the subfloor (Fig. 4.5). The sensor must be solidly fastened to
the subfloor to ensure it stays in place when the cement or an equivalent binder
(cement glue, ceramic glue, self-levelling cement) is applied.
20
Hot glue gun, hammer, wood chisel or concrete chisel
channel
CAUTION!
temperature
sensor
/
" X
3
8
/
" X 10")
3
8
Advertisement
Table of Contents
